New product: 7.62/303 Bullets, 123 grain

CanAm

CanAm

Canada Ammo - CGN Sponsor
Location
Vancouver, BC
0.310" 123 Grain bullets pulled from unfired 7.62x39 cartridges
Great plinking bullets for 7.62x39, 303 British, 7.62x54R, etc
Steel Core
Case of 1000 bullets
Made in Russia
$149.99




https://www.canadaammo.com/product/detail/bullets-303-7-62mm-123-grain-pull-down/

img_2467.jpg
 

Attachments

  • img_2467.jpg
    img_2467.jpg
    37.3 KB · Views: 2,005
Not in .308 as it is .308 diameter and these are .310 bullets. The 7.62x54R and .303 British ..........yes but accuracy may vary gun to gun because of .310 bullet fit in bores anywhere from .310 -.316 These are for plinking not accuracy loads.If these pulled bullets have a hollow base they will expand to "fit" the bore when fired if the load is warm enough ...............helping accuracy.If you load 7.62x39 these are cheap projectiles for non-corrosive fun.......trap line beaver loads etc.....a 1-10" twist will work fine for these......Harold
 
mbogo3 said:
Not in .308 as it is .308 diameter and these are .310 bullets. The 7.62x54R and .303 British ..........yes but accuracy may vary gun to gun because of .310 bullet fit in bores anywhere from .310 -.316 These are for plinking not accuracy loads.If these pulled bullets have a hollow base they will expand to "fit" the bore when fired if the load is warm enough ...............helping accuracy.If you load 7.62x39 these are cheap projectiles for non-corrosive fun.......trap line beaver loads etc.....a 1-10" twist will work fine for these......Harold
Click to expand...

If that is the case, then why does a company use a .308 bore in their 7.62x39 rifles?
 
A company would be Ruger. And their mini 30 .....not particularly accurate......likely because the Americans will shoot a .308 and bullets are more plentiful. A .310 bullet will raise pressure somewhat.I shoot .311 Sierra 150gr in my CZ 527 and SKS but work up loads carefully............Harold
 
Brian46 said:
If that is the case, then why does a company use a .308 bore in their 7.62x39 rifles?
Click to expand...

I believe Savage was the only one that used a .308 bore on their 7.62x39 bolt gun,big mistake,if it would have been the proper .311 bore,they would have sold a lot better.these pulled projectiles are good for some,myself,i get a case of 1500 of corrosive surplus for the same price per round,and i dont have to load it,or i can pull some myself if a want,
 
You must log in or register to reply here.
Back
Top Bottom