If you're interested in something with unbelievable quality or a very unique piece for your Colt collection, this is it. These are British Special Forces production fully floated AR-15 uppers complete with bolt carrier assembly and charging handle. Extremely limited numbers, don't miss out!
Reply if interested, we will only be ordering based on demand.

Name:  image001.jpg
Views: 338
Size:  23.3 KB

Colt Canada British Special Forces 3rd Gen Integrated Upper Receiver’s
Production units to ship to the Brits in 2017 – NOT SURPLUS OR OVER RUNS*
Canadian civilian pricing same as Government contract price.
DESCRIPTION:
GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
Made for the UK Special Forces
Interchangeable fit on all Mil-Spec “push pin" lowers;
Fully floating barrel system;
Dry film lubricated bolt carrier channel;
Screw retained (easily maintained) low profile gas block (under the handguard for safety);
Mil-Spec hard anodized black;
IUR is marked COLT CANADA 2C085 and NATO on the rail;
Straight gas tube to increase life and ease of installation.
BARREL:
Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel;
Canadian Forces Spec thicker chrome;
Phosphated to Mil-Spec;
Improved integral forged carbine chamber;
Colt Canada hammer forged choke bore;
1/7” twist RH/ 6 groove NATO approved bore;
Batch marked barrel and barrel extension;
High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec;
Anti corrosion coating applied under the handguards;
New liner to improve thermal protection of hands.
FLASH HIDER:
Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.
RAILS:
Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom);
Reinforced grenade launcher recoil lug;
The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
Rail slots are numbered with laser engraving;
The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories;
Protected low profile gas block;
IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches
BOLT CARRIER ASSEMBLY:
Full Canadian Forces specification (Military configuration) bolt carrier assembly;
Proof tested, MPI inspected, and lot number controlled bolt;
CF spec high retention staking of the carrier key;
Chrome lined carrier and key for wear resistance;
Chromed firing pin.
COLT CANADA TACTICAL CHARGING HANDLE:
Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place;
Solid latch pin is permanently staked in place for worry free operations;
Mil-Spec finishes applied for weather resistance.
PRICING
Two barrel lengths;
10.5” Integrated Upper Receiver (BCA+CH) – $1749.95 MSRP
15.7” Integrated Upper Receiver (BCA+CH) – $1849.95 MSRP


Delivery first week of October.
*All British Special Forces uppers sold in the Canadian civilian market will be replaced for the SAS order prior to delivery in 2017. Product is already sold to the Brits, therefore not discounted like previous Danish surplus.