TacticalTeacher
CGN Ultra frequent flyer
- Location
- Georgian Bay, ON
We are happening in Quebec! Mark that in your calendars!
Here's a picture showing what you can look forward to:
This is another M14 clinic in this great region of Canada and I'm glad to be back in Ottawa area, but on the QC side of things! Yeah you Ontario M14 lovers can cross the river, and yer ####s won't fall off!
If you have a receiver and a barrel to put together, we can make this happen for you at this clinic. I have all the tools. I can even install your .308 Win chambered barrel and then finish ream that chamber (that's a serious upgrade, but also fabulous learning opportunity for newbies to see)
Where:
Right here baby: http://www.clubtiroutaouais.com/contact
Google Map: https://www.google.ca/maps/place/Ch...36b3642f691a7a!8m2!3d45.6110301!4d-75.4016732
When:
Saturday 19 November 2016
Cost:
$ 65 for the day
Timing:
Gather for 0830
Casual Start at 0900
Ending at 1600
Registration and Payment:
EMT the $65 to me with this information:
Name: Tactical Teacher
Question: What was your OLD CGN handle? I was not always tacticalteacher, you know.
Answer: hungry (low caps, no spaces) that way I cannot screw things up
Email: hungry556 AT bell DOT net
What is involved:
- Tools for tweaking, tools to avoid, tools that are nice to have but expensive, tools that are overrated and too expensive
- Gadgets that are nice to have, need to have, and useless to have (but I had to buy it to show you)
- Tools that you can make yourself instead of buying, tools that you can have buddies (owe you favors) make up for you
- Stripping the boomstick (you will be surprised at what I can show you)
- YES we will pull your rear sights apart, and then get serious with them
- Assembling the boomstick, and what to look for so that worthwhile tweaks can be or should be made
- Tweaks that work, tweaks that don't work, expensive tweaks so yer #### does not fall off
- Useless tweaks unless you have more money than shooting ability (many stories to follow at the clinic)
- Common pitfalls, expensive tweaks that work, more ways to ensure that yer #### don't fall off
- Lunch and then tweaking in the afternoon to tighten up your prized M14
- Lots of networking and socializing all the time. This is priceless.
- I am set up to install your .308 Win barrel on your receiver and then FINISH Chamber
Things to bring for Day 1:
* Your M14 (or two if you got them)
* Notebook, pens, digital camera, rags,
* Ball peen hammer, Allen keys SAE and Metric
* Punches, screwdrivers, more punches
* Plastic or rubber mallet, wood block or 2 or 3
* Masking tape, duct tape
And here we are cutting the final 10 thou of the "short chamber" after installing this Krieger Medium barrel back in Fall 2014.
Questions? Post them right here in this forum!
Cheers,
Barney
Here's a picture showing what you can look forward to:
This is another M14 clinic in this great region of Canada and I'm glad to be back in Ottawa area, but on the QC side of things! Yeah you Ontario M14 lovers can cross the river, and yer ####s won't fall off!
If you have a receiver and a barrel to put together, we can make this happen for you at this clinic. I have all the tools. I can even install your .308 Win chambered barrel and then finish ream that chamber (that's a serious upgrade, but also fabulous learning opportunity for newbies to see)
Where:
Right here baby: http://www.clubtiroutaouais.com/contact
Google Map: https://www.google.ca/maps/place/Ch...36b3642f691a7a!8m2!3d45.6110301!4d-75.4016732
When:
Saturday 19 November 2016
Cost:
$ 65 for the day
Timing:
Gather for 0830
Casual Start at 0900
Ending at 1600
Registration and Payment:
EMT the $65 to me with this information:
Name: Tactical Teacher
Question: What was your OLD CGN handle? I was not always tacticalteacher, you know.
Answer: hungry (low caps, no spaces) that way I cannot screw things up
Email: hungry556 AT bell DOT net
What is involved:
- Tools for tweaking, tools to avoid, tools that are nice to have but expensive, tools that are overrated and too expensive
- Gadgets that are nice to have, need to have, and useless to have (but I had to buy it to show you)
- Tools that you can make yourself instead of buying, tools that you can have buddies (owe you favors) make up for you
- Stripping the boomstick (you will be surprised at what I can show you)
- YES we will pull your rear sights apart, and then get serious with them
- Assembling the boomstick, and what to look for so that worthwhile tweaks can be or should be made
- Tweaks that work, tweaks that don't work, expensive tweaks so yer #### does not fall off
- Useless tweaks unless you have more money than shooting ability (many stories to follow at the clinic)
- Common pitfalls, expensive tweaks that work, more ways to ensure that yer #### don't fall off
- Lunch and then tweaking in the afternoon to tighten up your prized M14
- Lots of networking and socializing all the time. This is priceless.
- I am set up to install your .308 Win barrel on your receiver and then FINISH Chamber
Things to bring for Day 1:
* Your M14 (or two if you got them)
* Notebook, pens, digital camera, rags,
* Ball peen hammer, Allen keys SAE and Metric
* Punches, screwdrivers, more punches
* Plastic or rubber mallet, wood block or 2 or 3
* Masking tape, duct tape
And here we are cutting the final 10 thou of the "short chamber" after installing this Krieger Medium barrel back in Fall 2014.
Questions? Post them right here in this forum!
Cheers,
Barney
Last edited: