Build Your Own Poly

Q

Questar2

Sponsoring Dealer
Want to build your own POLY 80 but not sure where to start????


10000_241128_zps4gwmcxhz.jpg




Well start with US! We offer everything you will need for your project.


Do you need the frame? Grab one here;

https://shopquestar.com/shopping65/shopexd.asp?id=2891&bc=no




Have the frame and need parts to finish it off?


9MM? Find your 9MM frame completion kit here;


https://shopquestar.com/shopping65/shopexd.asp?id=2885&bc=no


Maybe 40S&W is what you're after. You can find that one here;


https://shopquestar.com/shopping65/shopexd.asp?id=2884&bc=no






So you've got the frame and all the parts you need to finish it off? Now you need a slide. Well we've got you covered on that as well.


https://shopquestar.com/shopping65/shopexd.asp?id=2890&bc=no


Any slide Lone Wolf offers from Blank to Bare to a fully assembled one, just use this service and we'll get it in for you. You can find some of the options on Lone Wolf's website here...


http://www.lonewolfdist.com/Products.aspx?CAT=244





Now, you've got your slide and you need the parts kit for it right?

10000_234427_zpsuwixkn0k.jpg




You're a 9MM guy?

https://shopquestar.com/shopping65/shopexd.asp?id=2886&bc=no


or you're a 40S&W gal?

https://shopquestar.com/shopping65/shopexd.asp?id=2887&bc=no


We've got you covered either way.


Choose the sights you'd like and your slide is ready to go.....



Now you have your frame and all its parts and you've decided on the slide and it's required parts, well that leaves you with needing a barrel doesn't it?


Lots of options available.........



9MM?

https://shopquestar.com/shopping65/shopexd.asp?id=2888&bc=no



40S&W?

https://shopquestar.com/shopping65/shopexd.asp?id=2889&bc=no



Do you want something a little more custom? Something ported, maybe threaded?


Well use this service for anything Lone Wolf offers:


https://shopquestar.com/shopping65/shopexd.asp?id=2049&bc=no


Or this service for anything Storm Lake offers:


https://shopquestar.com/shopping65/shopexd.asp?id=2034&bc=no



That leaves you with needing a guide rod and recoil spring. Both of which you can find on our site.


9MM


https://shopquestar.com/shopping65/shopexd.asp?id=227&bc=no


40S&W

https://shopquestar.com/shopping65/shopexd.asp?id=228&bc=no


Springs from ISM in 11lbs to 15lbs are all available.


Add a Glock Magazine and your ammo of choice, hit the range and enjoy!
 
play.soccer said:
Any chance of complete uppers rather than having to piece together an order?
Click to expand...

We've thought about it but what we've struggled with is what configuration to offer? It seems everyone wants something different.

So far we're seeing a 60/40ish split between 9 and 40 slide's but a huge mix of barrels (9, 40, ported, threaded, blued, in the white, etc.) and sights (std., night, 6.1, 6.5, 6.9, adjustable....)


Scott
 
You're Killin me here. Order incoming...

PS:
I've spoken to the guys at Polymer80 and the 80% G19 frames should hit the market early 2017.

Will you get those when available??
 
QUOTE=mt666tm;13103574]You're Killin me here. Order incoming...

PS:
I've spoken to the guys at Polymer80 and the 80% G19 frames should hit the market early 2017.

Will you get those when available??[/QUOTE]

We plan on making them available once they're released.

As far as taking any pre-orders, no. We've been bit to many times by manufacturers saying something is going to happen and then not or never following through. Then we're on the hook trying to fix the mess they've created.

So, if you see they've been released and they're not up on our website yet send us a note.

Scott
 
Astute Observer said:
Sorry for the stupid question, I've never owned a Glock. Is this frame for a Glock 17? And the same frame will support both 9mm and .40 builds? So it's the same frame as the Glock 22?

Thanks
Click to expand...

Not a stupid question at all! These frames are what are considered FULL Size frames and can be built into either a 9MM or a 40S&W pistol.

So you can build them into a G17 clone or a G22 clone depending on which parts kit you choose to go with. The only difference in the parts kits is Ejectors they come with. 9MM uses a bent ejector while the 40S&W (and .357SIG) use a straight one.

Scott
 
Questar2 said:
Not a stupid question at all! These frames are what are considered FULL Size frames and can be built into either a 9MM or a 40S&W pistol.

So you can build them into a G17 clone or a G22 clone depending on which parts kit you choose to go with. The only difference in the parts kits is Ejectors they come with. 9MM uses a bent ejector while the 40S&W (and .357SIG) use a straight one.

Scott
Click to expand...

Great, thanks! Plus, kudos on the response within 14 minutes!
 
I see the slides need a 99 dollar import charge added. If I want two slides, would it be 200 or same 99 dollars since it's same item?
 
MAD_MAX333 said:
I see the slides need a 99 dollar import charge added. If I want two slides, would it be 200 or same 99 dollars since it's same item?
Click to expand...

It will depend on what you are looking at. Send me an email (scott@questar.ca) or PM and we can discuss.

Scott
 
If you had it all on one page with choices that we can click on to put in our cart as we go down the page/pages of your site and when we got to the end we know everything we need is there, or provide kits as I mentioned in your other post! Thanks for bringing these in! Cheers Bob
Has anyone assembled one of these yet, here or in the U.S.. just wondering how well they work and how accurate they are!
 
bobdbldr said:
If you had it all on one page with choices that we can click on to put in our cart as we go down the page/pages of your site and when we got to the end we know everything we need is there, or provide kits as I mentioned in your other post! Thanks for bringing these in! Cheers Bob
Has anyone assembled one of these yet, here or in the U.S.. just wondering how well they work and how accurate they are!
Click to expand...

Hey Bob,

Unfortunately the website isn't quite set-up for this sort of thing especially with all of the possible configurations.

There are several YouTube video's out there from people who have assembled them. As far as how well they work and how accurate they are, well that is going to come down to how the machining is done, what the slide to frame fit is and barrel to slide fit is like and the quality of components used. Just like the mass produced pistols on the market, there are ones that are cheap and put together quickly that shoot and work ok and then there are those that spend time hand fitting parts and that shoot very accurately and work very reliably.

Scott
 
You must log in or register to reply here.
Back
Top Bottom