Page 6 of 28 FirstFirst 12345678910111213141626 ... LastLast
Results 51 to 60 of 273

Thread: Scorpio SKS-15 7.62x39mm Non-Restricted

  1. #51
    CGN Ultra frequent flyer Stevo's Avatar
    Join Date
    Mar 2004
    Location
    NW Alberta
    Posts
    14,346
    If your XCR mags don't feed properly when full, just trim the springs a bit. It's not rocket science.
    Whatever

  2. #52
    Member
    Join Date
    Mar 2014
    Location
    Nova Scotia
    Posts
    46
    Great looking rifle! I like the threaded barrel, the ability to use XCR mags, lighter weight and especially the price! Cleaning may be difficult but I am going to use non-corrosive anyway.

    However, my biggest concern is that since the rail is not directly attached to the receiver, would it hold zero after removing/installing the chassis?

  3. #53
    CGN Ultra frequent flyer Grove's Avatar
    Join Date
    Dec 2005
    Location
    GVRD
    Posts
    3,631
    Gotta say......that is one wicked setup ya got there.

    Very impressed so far, can't wait to see videos of this in use.




  4. #54
    CGN Regular kablam's Avatar
    Join Date
    Mar 2014
    Location
    Southern Alberta
    Posts
    523
    Quote Originally Posted by chicu1981 View Post
    What's wrong with the wood stock it comes with? Why is everyone trying to "ninjafy" this rifle?
    "Kardashify"

    Why You Shouldn't Get Into Guns

  5. #55
    CGN frequent flyer Bonjour43ma's Avatar
    Join Date
    Nov 2010
    Location
    GVRD
    Posts
    1,029
    Curious to know how it disassembles for cleaning.


    And the accuracy

    And reliability

  6. #56
    CGN Regular Mikeschurman's Avatar
    Join Date
    Jan 2012
    Location
    Edmonton, AB
    Posts
    339
    Quote Originally Posted by Brian46 View Post
    Any chance of seeing one that takes AK mags in the future?

    and of course other colors?
    I'd like to see a one of these use ak mags too. if there is feeding problems and you can't put in 10 in the xcr mag whats the point for a few extra rounds. You might as well have one that uses an an ak mag. At least they seem to work, my sks d runs just fine
    Insert list of guns you own here:
    (Who needs a registry if everyone advertises what they own)

    Scrap Bill C-68

  7. #57
    CGN Regular Robert777's Avatar
    Join Date
    Mar 2006
    Posts
    979
    I think this looks like a fun gun. And it will sell.

  8. #58
    CGN Ultra frequent flyer Gatehouse's Avatar
    Join Date
    Mar 2004
    Location
    Pemberton BC
    Posts
    26,265
    All my pistol mags run fine with nine rounds. Some work fine with ten. If ten is important, just play with the mags that only hold nine. Just make sure you don't turn them to eleven
    375 Ruger is the NEW KING of the .375's. ALL HAIL THE NEW KING!

  9. #59
    Super GunNutz 9mmGunGuy's Avatar
    Join Date
    Jun 2013
    Location
    S. Ontario
    Posts
    3,953
    Quote Originally Posted by rubberdonuts View Post
    I currently run my 10 rnd XCR mags to 8/10 but no more than 9/10 due to feeding issues. It has to be due to the round. I have 4 XCR mags and 1 NEA mag. Spent a few range trips trying to diagnose my Gen 2 NEA. Changed buffer weights, polished feed ramps, and even thru on a noveske pig for that extra pressure. Still didn't fix it, sure looks cool tho. In the end it was the mags. Being ASC or C Products or NEA it doesn't matter. Some mags just don't work. I've been debating buying another 5 mags of the new stock stores received these past few months to further engage this problem but I'm thinking it's cheaper to just swap out the barrel to 556 and be done with it entirely. Currently going on 600 rounds not a single jam using Barnaul and Norinco non corrosive since i started loading 1-2 less. Still better than 5 rounds.
    What gun are you using?
    CSSA/CCFR MemberAn unjust law, is no law at all.Martin Luther (1483-1546)
    There may be times when we are powerless to prevent injustice, but there must never be a time when we fail to protest. Elie Wiesel

  10. #60
    CGN Regular Rashed's Avatar
    Join Date
    Feb 2014
    Location
    Toronto (GTA)
    Posts
    245
    Not sure if I like it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •