The long awaited PWS rifle package has arrived

[Questar2]

We've just received the long awaited PWS MK1 MOD 2 Rifle....... and it looks nice!


https://shopquestar.com/shopping65/s...?id=2750&bc=no


The rifle's are now shipping in a soft case, complete with PMAG, rail segments, BCM QD rail segment and more.






These are the new fully ambi lowers:

[bfiles]

Any chance you guys can get the ambi lower with a 7.62x39 upper??

[Questar2]

Sadly PWS stopped offering their 7.62X39 uppers / rifle's a couple of years back. So a PWS 7.62X39 complete rifle isn't doable.

Scott

[bfiles]

Would the x39 upper work with these ambi lowers??

If I were to purchase a 223 rifle and sell the upper to buy a x39 PWS upper should work, no???

[Questar2]

Would the x39 upper work with these ambi lowers??

If I were to purchase a 223 rifle and sell the upper to buy a x39 PWS upper should work, no???

When you say 'X39' upper which exactly do you mean? Make / Manufacturer?

Scott

[FoxAlpha]

Would the x39 upper work with these ambi lowers??

If I were to purchase a 223 rifle and sell the upper to buy a x39 PWS upper should work, no???

As far as I can tell, the ambi set up they're using is very similar to what a lot of other manufacturers are using, so in theory there shouldn't be any reason why you couldn't toss any other upper onto this lower, including a x39. Or just swap the barrel ass. and BCG.

[bfiles]

When you say 'X39' upper which exactly do you mean? Make / Manufacturer?

Scott

If I can source out a x39 PWS upper, then that upper should still snap right into the ambi lower with no issues??

[bfiles]

As far as I can tell, the ambi set up they're using is very similar to what a lot of other manufacturers are using, so in theory there shouldn't be any reason why you couldn't toss any other upper onto this lower, including a x39. Or just swap the barrel ass. and BCG.

This is what im thinking. Should be a go but want to make sure 100% before dropping g several G's on a rifle that the lower wouldn't accept a PWS upper.

[Questar2]

If I can source out a x39 PWS upper, then that upper should still snap right into the ambi lower with no issues??

I'm with you now. Yes this PWS lower will work with a PWS 7.62X39 upper.

Scott

[bfiles]

Good to hear Scott, thanks man!!!!

Now just need to decide what my options are and how much $$$$ this will all cost.
It's looking like I'll need possibly 2 complete rifles to build my 1 rifle. Ahhhhh