$vboptions[bbtitle]

Page 1 of 4 1234 LastLast
Results 1 to 10 of 32

Thread: NEW Low profile Plate carrer from S&J Hardware

  1. #1
    Supporting Dealer badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    9,251

    NEW Low profile Plate carrer from S&J Hardware

    We are happy to announce our new S&J Hardware plate carrier.
    Like all of our product, a lot of thought and time has gone into this project.
    We have been work on this project on and off for 3+ years.
    Working with other people in the textile industry and other Gear makers both In Canada, USA and the UK, has turned into along battle with trying to get contractors to do what we asked.
    Lack of understanding and inability to make a product that meet our very high standard has put this project on hold many times.
    That all said this last 6 months, we have been working with company local to us, that understands, what perfection is, and understands that many peoples lives will depend on this product being perfect.
    Many of the people involved in this project are life long armed force members, and many of the staff are married to armed forces members.
    Our new Plate carrier is a combined effort from people both in the Police, Mil, Army, SOF and security contractors.

    We have taken the very best ideas from 10 different plate carriers, combine with the ideas we have and T&E from our
    Police, Mil, Army, SOF and security contractors.


    Some of the spec of the plate carrier .

    Frame and backing of the carrier is make from 1 pc of 36 oz Hypalon, these means no chance of shoulder straps coming unstitched if you have to put excessive load on the plate carrier (man down/ dragging a team mate of the X)
    Backing is made from 3d spacer mesh
    ITW quick mount buckles
    vertical webbing for itw quick clips are Velcro covered to no loss of contact on covered up with hook side velcro
    Cummberbunn. 4 inch elastic with built in mag holder/ storage, box stitched triple stitch is high wear areas

    Cummberbunn has 14 inch of adjustment, with Hypalon pull tabs
    Shoulder straps have 8 inch of adjustment, will 1 slots lasercut into them to allow for attachment is needed.
    Plate pocket size will take 10x12 shooters cut plates up to 1 inch thick.
    Both front and back are fully covered in Velcro , so as to not limit your placement of Pouch. Or I.D patch.
    All Textiles meet US mil spec, inc Rot resistant stitching.
    As all textiles use are synthetic , this plate carrier will not retail any water, and have a very low IR signature.
    100% made in Canada but people that understand that “ good enough” is not acceptable

    Please contact us for more detailed information.
    Simon Beeson
    Owner/Partner
    S&J Hardware Inc
    sales@sjhardware.com
    Name:  bbb carrier 2 (2).jpg
Views: 1497
Size:  53.8 KB
    Name:  bbb carrier 3.jpg
Views: 1494
Size:  57.0 KB
    Name:  bbb carrier 4.jpg
Views: 1495
Size:  60.7 KB
    www.sjhardware.com
    sales@sjhardware dot com

  2. #2
    CGN Regular davis0944's Avatar
    Join Date
    Mar 2013
    Location
    Southern Ontario
    Posts
    128
    looks proper, good job!

  3. #3
    Super GunNutz lucsergerie's Avatar
    Join Date
    Apr 2014
    Location
    Niagara Falls
    Posts
    568
    - Price ?

  4. #4
    CGN Regular call2arms's Avatar
    Join Date
    Mar 2014
    Location
    Edmonton AB
    Posts
    338
    Has everything I would want. Perfectly executed. Are other colours available?

  5. #5
    Newbie cgbuff's Avatar
    Join Date
    Dec 2012
    Location
    Toronto
    Posts
    19
    Seriously interested, sent you guys an e-mail!

  6. #6
    Supporting Dealer badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    9,251
    While we have settled on the design , and the photos we posted are the production item, we will not start our production run of black until next month.

    The plan is for the carrier for me in the $269-289 range.
    while this is at the upper price point of a Low profile plate carrier, it is in a class of its own, when it comes to quality.
    But we want to make this affordable, without lowering the quality.
    This will be a production item, not a one off or hand made, so each items will fit and feel like the next.
    so no issue with fitment of plates, which seems to be an issue when you have one off or custom made products.

    Black to start, then we will do TAN/FDE

    And last we will do Muti cam.
    We would do free shipping when we get these ready to ship.
    Many thanks
    simon
    www.sjhardware.com
    sales@sjhardware dot com

  7. #7
    GunNutz Bobbyg00's Avatar
    Join Date
    Sep 2014
    Posts
    311
    Dang. Just bought one!! Sounds like a great product.
    I am a Canadian, a free Canadian, free to speak without fear, free to worship God in my own way, free to stand for what I think is right, free to oppose what I believe wrong, free to choose those who shall govern my country. This heritage of freedom I pledge to uphold for myself and all mankind.

  8. #8
    Big Mouth Redblack's Avatar
    Join Date
    Sep 2012
    Location
    alberta
    Posts
    1,102
    Looks really good

  9. #9
    CGN Regular davis0944's Avatar
    Join Date
    Mar 2013
    Location
    Southern Ontario
    Posts
    128
    Will wait for the FDE or Multicam... great price though.

  10. #10
    CGN Regular
    Join Date
    Jun 2009
    Location
    BC
    Posts
    276
    Any chance of navy blue?

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •