Results 1 to 10 of 10

Thread: Stag .308 Special Pre-Order Pricing!

  1. #1
    Business Member ARMS EAST's Avatar
    Join Date
    Mar 2015
    Posts
    157

    Stag .308 Special Pre-Order Pricing!

    Limited Time Only! Special Pre-Order Pricing!


    Stag .308 Upper/Lower Combo

    The Stag .308 upper receiver assembly includes a picatinny rail on the top, dust cover, and installed forward assist. The Stag .308 lower receiver includes an installed lower parts kit.

    Our upper receiver uses a DPMS High Profile, tang height of .210. It uses the same barrel nut threads as DPMS, accepts DPMS barrels, accepts Stag, Armalite and DPMS BCGS and Charging Handles.

    Our lower receiver will accept any standard DPMS magazine, buffer and buffer spring. It will also work with any AR15 Stock.

    Due to high demand, please allow for a 4-6 week lead time for shipping



    Stag 10S (.308) Bones

    The Stag Arms Stag 10S Bones is a high quality, durable, large frame AR rifle that is ready for you to customize to your liking.

    This model features a .308 Winchester (7.62x51mm) chamber 16” 1/10 barrel, 6 position receiver extension tube, VG6 Gamma 762 and a QPQ Nitride coated BCG.

    Every complete rifle from Stag Arms comes with a Transferable Lifetime Warranty, an Infinite Shot Barrel Guarantee, a magazine and a rifle case.

    Compatibility:

    This rifle uses a DPMS High Profile, tang height of .210, allowing it to match with the most common DPMS handguards. It will also accept any AR15 Mil-Spec Stock and Pistol Grip.

    Due to high demand, please allow for a 4-6 week lead time for shipping



    Stag 10 (.308) Bones

    The Stag Arms Stag 10 Bones is a high quality, durable, large frame AR rifle that is ready for you to customize to your liking.

    This model features a .308 Winchester (7.62x51mm) chamber 18” 1/10 barrel, 6 position receiver extension tube, VG6 Gamma 762 and a QPQ Nitride coated BCG.

    Every complete rifle from Stag Arms comes with a Transferable Lifetime Warranty, an Infinite Shot Barrel Guarantee, a magazine and a rifle case.

    Compatibility:

    This rifle uses a DPMS High Profile, tang height of .210, allowing it to match with the most common DPMS handguards. It will also accept any AR15 Mil-Spec Stock and Pistol Grip.

    Due to high demand, please allow for a 4-6 week lead time for shipping


    www.armseast.ca Toll Free 1-844-579-0007 EMAIL info@armseast.com

  2. #2
    CGN frequent flyer wildphil24's Avatar
    Join Date
    Apr 2009
    Posts
    1,720
    Nice!
    No lefties at this time?
    "To disarm the people is the best and most effectual way to enslave them."
    - George Mason

  3. #3
    CGN Ultra frequent flyer P0WERWAGON's Avatar
    Join Date
    Mar 2004
    Location
    burnaby BC كافر
    Posts
    4,170
    is this made with DPMS Gen1 or Gen2 style internals?

  4. #4
    CGN Regular
    Join Date
    Mar 2009
    Location
    Alberta
    Posts
    662
    Stupid question: is NR?

  5. #5
    Business Member ARMS EAST's Avatar
    Join Date
    Mar 2015
    Posts
    157
    Quote Originally Posted by P0WERWAGON View Post
    is this made with DPMS Gen1 or Gen2 style internals?
    High Tang, the more common G1.

    www.armseast.ca Toll Free 1-844-579-0007 EMAIL info@armseast.com

  6. #6
    Business Member ARMS EAST's Avatar
    Join Date
    Mar 2015
    Posts
    157
    Quote Originally Posted by lj007 View Post
    Stupid question: is NR?
    Restricted.

    www.armseast.ca Toll Free 1-844-579-0007 EMAIL info@armseast.com

  7. #7
    CGN frequent flyer
    Join Date
    Mar 2009
    Location
    AB
    Posts
    1,801
    One of these would go nicely with the XCR M pistol mags I just ordered

    Do these take standard AR15 triggers? Are the buffer tubes commercial or milspec?
    Last edited by b_w.; 04-14-2017 at 04:03 PM.

  8. #8
    Business Member ARMS EAST's Avatar
    Join Date
    Mar 2015
    Posts
    157
    Quote Originally Posted by b_w. View Post
    One of these would go nicely with the XCR M pistol mags I just ordered

    Do these take standard AR15 triggers? Are the buffer tubes commercial or milspec?
    Standard AR triggers. Stag uses (and makes) milspec tubes. Anything else, don't hesitate to ask!

    www.armseast.ca Toll Free 1-844-579-0007 EMAIL info@armseast.com

  9. #9
    Business Member ARMS EAST's Avatar
    Join Date
    Mar 2015
    Posts
    157

    Complete Rifles Also Available for Order

    Stag 10 and 10s rifles are also available for order if you'd rather buy a completed rifle.

    Stag 10


    The Stag Arms Stag 10 was specifically designed for long range use. This rifle uses the .308 cartridge for extra power to reach out and touch your target. The Stag .308 line features an Armalite Slant Cut and includes uniquely designed parts for the lower to guarantee the best fit between the upper and lower. The remainder of the rifle utilizes the DPMS .308 platform for parts compatibility.

    The Stag 10 features a 7.62x51 (.308) chamber 18” 1/10 barrel, VG6 Gamma Compensator, 15" Diamondhead VRS-T 308 Handguard and a QPQ Nitride BCG.

    Every complete rifle from Stag Arms comes with a Transferable Lifetime Warranty, an Infinite Shot Barrel Guarantee, a magazine and a rifle case.

    Due to high demand, please allow for a 4-6 week lead time for shipping

    Stag 10s


    The Stag Arms Stag 10S was specifically designed for those moments where you need that extra power in close quarters. The Stag .308 line features an Armalite Slant Cut and includes uniquely designed parts for the lower to guarantee the best fit between the upper and lower. The remainder of the rifle utilizes the DPMS .308 platform for parts compatibility.

    The Stag 10S features a 7.62x51 (.308) chamber 16” 1/10 barrel, Magpul® ACS® Stock, 13.5" Diamondhead VRS-T 308 Handguard and a QPQ Nitride BCG.

    Every complete rifle from Stag Arms comes with a Transferable Lifetime Warranty, an Infinite Shot Barrel Guarantee, a magazine and a rifle case.

    Due to high demand, please allow for a 4-6 week lead time for shipping

    www.armseast.ca Toll Free 1-844-579-0007 EMAIL info@armseast.com

  10. #10
    CGN Regular
    Join Date
    Feb 2014
    Location
    Ontario
    Posts
    757
    I'm looking for a lefty 18" bones kit..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •