Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: CZ EVO Scorpion Aftermarket Parts Are Here! Apex Tactical & Shooters Element!

  1. #1
    Expired Business Member
    Join Date
    Oct 2011
    Location
    Vancouver, BC
    Posts
    2,275

    CZ EVO Scorpion Aftermarket Parts Are Here! Apex Tactical & Shooters Element!

    Apex Tactical Ambi Safety Set for the CZ Scorpion



    The Apex Safety Lever Set for the CZ Scorpion EVO 3 S1 adds additional width over the standard factory safety, allowing for more positive leverage during engagement or disengagement. The Safety Levers are made from 6061 aluminum, hardcoat anodized black, with a machined indicator line.

    $64.99

    Apex Tactical Optimized Grip for CZ Scorpion



    The Apex Optimized Grip for the CZ Scorpion EVO 3 S1 fits both the pistol and carbine, and optimized grip angle improves overall ergonomics when compared to the factory grip. Requires 3mm Allen wrench to install.

    $34.99

    Shooters Element CZ Scorpion EVO 3 Reduced Weight Trigger Spring Kit



    The HB Industry spring kit provides a 5.5lb trigger pull (down from 9.0+ lbs factory trigger). Simply remove your factory trigger and disconnector springs (#63 and #50 respectively on the factory parts diagram) and replace them with our application specific trigger and disconnector springs. Both springs in the kit must be used together. Gunsmith installation is recommended, but not required.

    $19.99

    Shooters Element CZ Scorpion Extended Magazine Release - Black



    This drop in extended magazine release for your CZ Scorpion EVO3 improves on the factory magazine release and gives you an extended paddle under the trigger guard. With extended and curved paddle, mag changes can be accomplished by activating the release with the shooters weak hand and thumb from either side of the weapon. Simply grab the magazine and the extended tab with your thumb and strip the mag out of your CZ Scorpion EVO3 S1 or A1. This type of mag change is similar to an AK or MP5 magazine change or tactical reload (Admin Reload).

    $64.99

    Shooters Element CZ Scorpion Flat Trigger



    The CZ Scorpion EVO III is a great pistol caliber carbine/pistol. However there's a few improvements most shooters see the need for after shooting it for the first time. Mainly the trigger, at 10lbs of pull weight or higher it's a bit to overcome for even the most experienced shooters. Because of this Shooters Element has developed a solution for the problem with our enhanced flat trigger.

    $54.99

    Shooters Element CZ Scorpion EVO 3 Improved Charging Handle



    While the charging system of the CZ Scorpion EVO III is unique and let’s admit, fun to use especially when the bolt is held open like the famous MP5 and other great HK guns, the handle is a bit on the small side. This can lead to a number of issues for users as some will grade knuckles on the integrated Picatinny rails and some will feel the smaller size of the charging handle won't give an adequate purchase on the handle and may find it uncomfortable to charge the weapon or difficult in high stress scenarios (defensive or competitive).

    $79.99

  2. #2
    CGN Ultra frequent flyer Patt08's Avatar
    Join Date
    Mar 2014
    Location
    East of the Rockies... West of the rest.
    Posts
    2,504
    Nice!
    |CCFR|

  3. #3
    CGN Regular madcowbandido's Avatar
    Join Date
    Mar 2010
    Posts
    100
    Sweetness! I'll be putting in an order.

  4. #4
    CGN Ultra frequent flyer sky52's Avatar
    Join Date
    Oct 2007
    Location
    Vancouver
    Posts
    2,248
    May wanna bring in the drill bit kit too. Since all the evo coming in will have the welded trigger pack.

  5. #5
    CGN Regular auracle's Avatar
    Join Date
    Dec 2012
    Location
    federal riding: Winnipeg South Centre
    Posts
    641
    HB industries handguards please and an ar buffer tube adapter kit would be great

  6. #6
    CGN frequent flyer THE_SASQUATCH's Avatar
    Join Date
    Sep 2011
    Location
    The Forest
    Posts
    1,449
    Quote Originally Posted by sky52 View Post
    May wanna bring in the drill bit kit too. Since all the evo coming in will have the welded trigger pack.
    So swapping for the flat trigger and reduced weight spring listed above not possible for a DIY job at this time?

  7. #7
    CGN Regular auracle's Avatar
    Join Date
    Dec 2012
    Location
    federal riding: Winnipeg South Centre
    Posts
    641
    Quote Originally Posted by THE_SASQUATCH View Post
    So swapping for the flat trigger and reduced weight spring listed above not possible for a DIY job at this time?
    Here's a video to remove the trigger pack.
    https://m.youtube.com/watch?v=m9sm1og5bf8

  8. #8
    CGN Ultra frequent flyer sky52's Avatar
    Join Date
    Oct 2007
    Location
    Vancouver
    Posts
    2,248
    Some 2015 models may or may not have a welded trigger pack. All 2016 and on will have the welded trigger pack.

    Cz usa is swapping out trigger for US owners, dunno CZ canada will or not. But seeing how the drill bit kit is so cheap, i dont want to wait a few weeks to swap it out

  9. #9
    CGN frequent flyer Bonjour43ma's Avatar
    Join Date
    Nov 2010
    Location
    GVRD
    Posts
    1,029
    Any luck with AR stock adapters?

  10. #10
    CGN Regular skooch's Avatar
    Join Date
    Jun 2005
    Location
    Battle River, AB
    Posts
    553
    Quote Originally Posted by sky52 View Post
    May wanna bring in the drill bit kit too. Since all the evo coming in will have the welded trigger pack.
    Mine is not welded.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •