TacticalTeacher
CGN Ultra frequent flyer
- Location
- Georgian Bay, ON
It's official, I'm coming out WEST to TSE in Calgary. I'll be flying out to YYC after most of hunting season (I have a buck tag, just waiting on the draw to see if I get a doe tag)
And (23 Sep 2017) YES... I have a Doe tag. SUCESS on the Draw!
We have spaces for 20 people and then I have to cut things off!
Edmonton Garrison M14 lovers:
This year we are having any participants from the Soldier ON program attend all my clinics for FREE! Come on out and have fun with us!
Where:
The Shooting Edge in Calgary. Here's a link to their website: http://www.theshootingedge.com/
When:
Saturday 25 Nov 2017 . One day of clinic tweaking.
Cost:
$60 for the DAY
Timing:
Gather for 0830
Casual Start at 0900
Lunch at 12ish to 1ish... I love that Farmer's Market next door for pulled pork poutine!
Ending at 1600
Registration and Payment:
EMT the $60 to me with this information:
Name: Tactical Teacher
Question: What was your OLD CGN handle? I was not always tacticalteacher, you know.
Answer: hungry (low caps, no spaces) that way I cannot screw things up
Email: hungry556 AT bell.net
Somewhere in the EMT, remind me of your CGN handle AND which clinic it's for (PR or CQB or M14)
What is involved:
- Tools for tweaking, tools to avoid, tools that are nice to have but expensive, tools that are overrated and too expensive
- Gadgets that are nice to have, need to have, and useless to have (but I had to buy it to show you)
- Tools that you can make yourself instead of buying, tools that you can have buddies (owe you favors) make up for you
- Stripping the boomstick (you will be surprised at what I can show you)
- YES we will try to pull your rear sights apart, and then get serious with them
- Assembling the boomstick, and what to look for so that worthwhile tweaks can be or should be made
- Tweaks that work, tweaks that don't work, expensive tweaks so yer #### does not fall off
- Useless tweaks unless you have more money than shooting ability (many stories to follow at the clinic)
- Common pitfalls, expensive tweaks that work, more ways to ensure that yer #### don't fall off
- Lunch and then tweaking in the afternoon to tighten up your prized M14
- Lots of networking and socializing all the time. This is priceless.
- I am NOT set up to do any barrel installs (No truck and Mac's Trail DVise since I am flying out there)
Things to bring for Day 1:
* Your M14 rifle or receiver(s) with barrel(s) to be installed
* Your M14 (or two if you got them)
* Notebook, pens, digital camera, rags,
* Ball peen hammer, Allen keys SAE and Metric
* Punches, screwdrivers, more punches
* Plastic or rubber mallet, wood block or 2 or 3
* Masking tape, duct tape
* Anybody got a Black and Decker Workmate? Bring it along, leave it inside the car/truck until we need it.
Questions?
Bring them on!
Cheers and warm regards,
Barney
And (23 Sep 2017) YES... I have a Doe tag. SUCESS on the Draw!
We have spaces for 20 people and then I have to cut things off!
Edmonton Garrison M14 lovers:
This year we are having any participants from the Soldier ON program attend all my clinics for FREE! Come on out and have fun with us!
Where:
The Shooting Edge in Calgary. Here's a link to their website: http://www.theshootingedge.com/
When:
Saturday 25 Nov 2017 . One day of clinic tweaking.
Cost:
$60 for the DAY
Timing:
Gather for 0830
Casual Start at 0900
Lunch at 12ish to 1ish... I love that Farmer's Market next door for pulled pork poutine!
Ending at 1600
Registration and Payment:
EMT the $60 to me with this information:
Name: Tactical Teacher
Question: What was your OLD CGN handle? I was not always tacticalteacher, you know.
Answer: hungry (low caps, no spaces) that way I cannot screw things up
Email: hungry556 AT bell.net
Somewhere in the EMT, remind me of your CGN handle AND which clinic it's for (PR or CQB or M14)
What is involved:
- Tools for tweaking, tools to avoid, tools that are nice to have but expensive, tools that are overrated and too expensive
- Gadgets that are nice to have, need to have, and useless to have (but I had to buy it to show you)
- Tools that you can make yourself instead of buying, tools that you can have buddies (owe you favors) make up for you
- Stripping the boomstick (you will be surprised at what I can show you)
- YES we will try to pull your rear sights apart, and then get serious with them
- Assembling the boomstick, and what to look for so that worthwhile tweaks can be or should be made
- Tweaks that work, tweaks that don't work, expensive tweaks so yer #### does not fall off
- Useless tweaks unless you have more money than shooting ability (many stories to follow at the clinic)
- Common pitfalls, expensive tweaks that work, more ways to ensure that yer #### don't fall off
- Lunch and then tweaking in the afternoon to tighten up your prized M14
- Lots of networking and socializing all the time. This is priceless.
- I am NOT set up to do any barrel installs (No truck and Mac's Trail DVise since I am flying out there)
Things to bring for Day 1:
* Your M14 rifle or receiver(s) with barrel(s) to be installed
* Your M14 (or two if you got them)
* Notebook, pens, digital camera, rags,
* Ball peen hammer, Allen keys SAE and Metric
* Punches, screwdrivers, more punches
* Plastic or rubber mallet, wood block or 2 or 3
* Masking tape, duct tape
* Anybody got a Black and Decker Workmate? Bring it along, leave it inside the car/truck until we need it.
Questions?
Bring them on!
Cheers and warm regards,
Barney
Last edited: