The Ultimatum Deadline has arrived

[Shelldrake]

1 - 1/16” 20tpi savage pre-fit barrel thread, sturdy 5/16" recoil lug,

So,, with this threading and with the recoil lug part of the action, then all we would need to do would be to twist on a savage pre-fit barrel to the correct headspace.
No barrel nut would be needed?,, Am I correct with this?

[UltimatumD]

So,, with this threading and with the recoil lug part of the action, then all we would need to do would be to twist on a savage pre-fit barrel to the correct headspace.
No barrel nut would be needed?,, Am I correct with this?

There are no shoulders on a savage pre-fit therefore you will need to lock the barrel in place with a barrel nut.

[Armafield]

There are no shoulders on a savage pre-fit therefore you will need to lock the barrel in place with a barrel nut.

Does Ultimatum have readily available supply of Savage pre-fit barrels?

[UltimatumD]

Does Ultimatum have readily available supply of Savage pre-fit barrels?

We have been actively testing our actions with a Canadian made barrel (International Barrels) with very good results. Our intent is to offer barrelled actions using these as soon as we can have dedicated supply from them. However we would not stock and sell barrels on their own. I would expect International would have inventory.

[jadam]

Thanks for your interest.
If you visit our website www.ultimatumprecision.com it will show all these components and describe their benefits.

Thanks. Didn't see them buried in the Accessories section....

Curious about your dual ejector system - especially the location of the ejectors. On the rendered image of the bolt head they seem to be on the same side of the bolt head as the extractor, or in line with the firing pin hole. Can't really tell.

[UltimatumD]

Thanks. Didn't see them buried in the Accessories section....

Curious about your dual ejector system - especially the location of the ejectors. On the rendered image of the bolt head they seem to be on the same side of the bolt head as the extractor, or in line with the firing pin hole. Can't really tell.

Dual ejectors are on the same side of the firing pin. This allows for more travel to ensure a positive ejection, especially with two plungers pushing the case out.

[jadam]

Dual ejectors are on the same side of the firing pin. This allows for more travel to ensure a positive ejection, especially with two plungers pushing the case out.

Interesting. Can't wait to see one in person!

[Jason Gao]

Nice work!

[dahunter]

I had a deposit with Bulls Eye a year ago for the 20 tpi. Can't wait to get it. It will go with the Canadian made MDT stock, Cadex trigger, and JC Custom Barrels. It'll be my first target rifle.

[Sakoman .308]

Looks like a very nice action, May be one day.