Results 1 to 10 of 10

Thread: Grizzly CNC Hand Guards @ Dlask Arms Corp.

  1. #1
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    2,988

    Grizzly CNC Hand Guards @ Dlask Arms Corp.

    So after almost a year of being out of stock we have finally had time to finish a run of our CNC hand guards for the DA Grizzly shotguns. Found here on the website :

    https://dlaskarms.com/products/domin...uminum-forearm
    Cheers,
    Leigh
    Dlask Arms Corp.
    www.dlaskarms.com

    “Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

  2. #2
    CGN Regular cyphie's Avatar
    Join Date
    Sep 2014
    Location
    Western Canada
    Posts
    159
    These won't work with the mag fed 8.5" grizzly?
    Last edited by cyphie; 11-27-2017 at 08:07 PM.

  3. #3
    CGN Regular
    Join Date
    Oct 2011
    Location
    GTA
    Posts
    402
    Quote Originally Posted by cyphie View Post
    These won't work with the mag fed 8.5" grizzly?
    Mine fit the 8.5" stands flgrizz, just not the mag fed one mentioned in the description as not working.

  4. #4
    CGN Ultra frequent flyer gwhysow's Avatar
    Join Date
    Apr 2009
    Location
    Toronto, Ontario
    Posts
    2,443
    Do you need a new tube? Pics on a standard gun?

  5. #5
    CGN Regular
    Join Date
    Jul 2010
    Location
    Toronto, ON
    Posts
    188
    Im slow...but would it fit a reg Rem 870? Express or Police or Marine?

  6. #6
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    2,988
    Quote Originally Posted by gwhysow View Post
    Do you need a new tube? Pics on a standard gun?
    No Sir, you don't need a new action bar. Simply remove the castle nut on the forward end, remove the plastic POS that comes with the gun and then install our CNC unit and replace the castle nut. Takes about 1.5 minutes total to change and makes a 100% difference in the look and feel of the firearm.
    Cheers,
    Leigh
    Dlask Arms Corp.
    www.dlaskarms.com

    “Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

  7. #7
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    2,988
    Quote Originally Posted by Chevguy93 View Post
    Im slow...but would it fit a reg Rem 870? Express or Police or Marine?
    Noop, it will not. You would need to cut and re-thread the action bar to shorten it. Also, the diameter is slightly different between the Rem and the Grizzly so you would need our CNC unit that comes on our Shorty shotties.
    Cheers,
    Leigh
    Dlask Arms Corp.
    www.dlaskarms.com

    “Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

  8. #8
    CGN frequent flyer srnm's Avatar
    Join Date
    Dec 2006
    Location
    Ontario
    Posts
    1,198
    ABOUT TIME!!!! Order placed!

  9. #9
    CGN frequent flyer srnm's Avatar
    Join Date
    Dec 2006
    Location
    Ontario
    Posts
    1,198
    Is it just me or is this version a little bit different then the older ones you made. These seem a little less “bulky/squared”. These look a lot better

  10. #10
    CGN Regular Kasey83's Avatar
    Join Date
    Mar 2012
    Posts
    141

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •