Page 1 of 4 1234 LastLast
Results 1 to 10 of 35

Thread: HB Industries CZ Scorpion Aftermarket parts are here! Triggers, Ext Charing Handles!

  1. #1
    Expired Business Member
    Join Date
    Oct 2011
    Location
    Vancouver, BC
    Posts
    2,275

    HB Industries CZ Scorpion Aftermarket parts are here! Triggers, Ext Charing Handles!

    HB Industries CZ Scorpion EVO 3 Reduced Weight Trigger Spring Kit



    Our spring kit provides a 5.5lb trigger pull (down from 9.0+ lbs factory trigger). Simply remove your factory trigger and disconnector springs (#63 and #50 respectively on the factory parts diagram) and replace them with our application specific trigger and disconnector springs. Both springs in our kit must be used together. Gunsmith installation is recommended, but not required.

    TIP: Many customers opt to also deburr and polish the working surfaces of the trigger components while replacing these springs; doing so will typically result in an even lower trigger pull weight and smoother trigger operation.

    • Provides 5.5lb Trigger Pull
    • Fits CZ Scorpion EVO3 Pistol and Carbine
    • Includes (1) Trigger Spring, (1) Disconnector Spring, and (1) Firing Pin Safety Shim


    $19.99

    HB Industries CZ EVO3 Scorpion Welded Trigger Pack Drill



    Do you need to remove the welded trigger pack from your 2015-2017 CZ Scorpion EVO S1 pistol/carbine? We have you covered. This kit includes the correct drill bit and a replacement screw.

    $11.99

    HB Industries CZ Scorpion EVO 3 DELTA Extended Charging Handle (Red or Black)



    $94.99

    HB Industries CZ Scorpion EVO 3 Theta Extended Charging Handle (Red or Black)



    $94.99

    HB Industries CZ Scorpion EVO3 THETA STOCK Trigger (Red or Black)



    $54.99

    HB Industries CZ Scorpion EVO3 THETA FORWARD Trigger (Red or Black)



    $54.99

    HB Industries CZ Scorpion EVO3 DELTA Trigger (Red or Black)

    [URL="https://ctcsupplies.ca/products/cz-scorpion-evo3-delta-trigger-red-or-black"]

    $54.99

    HB Industries CZ Scorpion EVO3 AK Style Safety Selector



    $49.99

    HB Industries CZ Scorpion EVO3 Mini AK Style Safety Selectors



    $44.99

    HB Industries CZ Scorpion EVO3 Duckbill Mag Release Lever



    $79.99

    HB Industries CZ Scorpion EVO3 Paddle Mag Release Lever



    $79.99

  2. #2
    CGN Regular panzer1's Avatar
    Join Date
    Jul 2014
    Location
    Québekistan
    Posts
    377
    $94.99

    HB Industries CZ Scorpion EVO 3 Theta Extended Charging Handle (Red or Black)

    it's twice the US price ??? mistake ?

  3. #3
    Member Eatstone's Avatar
    Join Date
    Apr 2010
    Location
    By the river below the mountains
    Posts
    86
    Damn. Just ordered from the States.

    Pricing is fair, beats the hassle from ordering direct.

  4. #4
    Newbie
    Join Date
    Jan 2017
    Posts
    26
    Just get those HBI handguards and I'll put in an order

  5. #5
    CGN frequent flyer Dr.Islay's Avatar
    Join Date
    Sep 2013
    Location
    Alberta
    Posts
    1,113
    FWIW, the Scorpions acquired from Wolverine will not need the drill bit kit.

    That said, everyone should grab the spring kit. Magic.
    CCFR Member & CSSA Member • “Freedom is something that dies unless it's used.” - HST

  6. #6
    CGN frequent flyer Bonjour43ma's Avatar
    Join Date
    Nov 2010
    Location
    GVRD
    Posts
    1,029
    +1 on the spring kit. Cheap mod big difference.

  7. #7
    CGN Regular sbe's Avatar
    Join Date
    Feb 2005
    Posts
    683
    Quote Originally Posted by squidxm View Post
    This
    Website says they do not ship international.

  8. #8
    CGN frequent flyer Dr.Islay's Avatar
    Join Date
    Sep 2013
    Location
    Alberta
    Posts
    1,113
    Quote Originally Posted by sbe View Post
    Website says they do not ship international.
    No one here is pulling your leg.

    That said, this is bordering on bad form on a respected dealer's forum.

    Thanks for partnering up, CTCS.
    CCFR Member & CSSA Member • “Freedom is something that dies unless it's used.” - HST

  9. #9
    CGN Regular doo925's Avatar
    Join Date
    Mar 2012
    Posts
    392
    Just a "watch out for" guys. After changing out the trigger springs for the HBI springs and putting some rounds thru it, check the case securing screw (p/n 48 in your Scorpion manual). Mine loosened off twice after range sessions. I tried blue Loctite after the HB Industries trigger spring install, but the screw still came loose. Might be something you want to keep an eye on.

  10. #10
    CGN Regular BadRonin's Avatar
    Join Date
    Aug 2014
    Location
    The Great White North
    Posts
    432
    Are you planning on restocking the shooters element gear soon?
    Flat trigger, charging, mag release..
    Click, Bang.

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •