How is this different from from the cdx 30 other than chassis?
Hello Sir
There's multiple differences but to name a few:
CDX-R7 Sheepdog/Shepherd
- True Rem 700 clone. Same action diameter, footprint, trigger style, etc.
- Short Action
- 4 lug 50 degree bolt throw ultra-fast cycling. Fat bolt design, but doesn't require any rework on the trigger positioning like some of our competitor's action)
- 1.250 " diameter barrel
- And
http://www.cadexdefence.com/catalog-flipbook/#page/24
CDX-30 Guardian
- Big heavy duty action 1.550" diameter. (keep in mind that some well-known action maker makes its 408 CT actions at 1.45" and 1.60" for this very powerful caliber)
- XL size action, even for the short action calibers. Bolt stop controls the bolt stroke.
- 3 lug 60 degree bolt throw. TRG style bolt design (bolt rides on its lugs)
- 1.350 " diameter barrel
- Must use Cadex single or double stage trigger (for a perfect fit with the safety mechanism)
- And lots more. For more info on our actions please refer to the following page (s) :
http://www.cadexdefence.com/catalog-flipbook/#page/22
Also, be advised that for 2018 all Cadex actions (except the Kraken) are available separate.
We are currently working with McMillan and Manners to provide them our inlet pattern and they will adapt their stocks to the Cadex actions:
- CDX-R7 Sheepdog (currently available from the factory in the following calibers: 6mm Creedmoor, 260 Rem, 6.5 CM, 6.5x47 Lap, 308 Win)
- CDX-R7 Shepherd (currently available from the factory in the following calibers: 300 Win Mag, 300 Norma Mag, 338 Lapua Mag, and soon 338 Norma Mag)
- CDX-30 Guardian (currently available from the factory in the following calibers: 6mm Creedmoor, 260 Rem, 6.5 CM, 6.5x47 Lap, 308 Win)
- CDX-300 Freedom (currently available from the factory in the following calibers: 300 Win Mag)
- CDX-33 Patriot (currently available from the factory in the following calibers: 300 Norma Mag, 338 Lapua Mag, and soon 338 Norma Mag)
- CDX-40 Shadow (currently available from the factory in the following calibers: 375 CT and 408 CT)
- CDX-50 Tremor (currently available from the factory in the following caliber: 50 BMG)
We are also about to launch a complete line-up of bottom metal to complete this project. So now if you are looking at a new top end custom build and that Cadex doesn't chamber in your preferred wildcat caliber, that you like a chassis system or not, we have a solution for you.
I hope that it answers your questions. If not, send a message to
patrice@cadexinc.com or call my cell phone at 514-821-7983 and I will help you one on one.
Best regards