Placed an order. ETA is 8-9 months.
Placed an order. ETA is 8-9 months.
Hi all,
I'm attempting to change the grip to a BCM Mod 0 and am having a bit of trouble. The included screw is longer and doesn't seem to want to screw in all the way. It stops at a point where I feel I will damage the threads if I keep trying. And when trying to use the shorter screw with the new grip, even when I crank it tight, the grip is loose and not secured tight. Could someone please advise me on what I'm doing wrong. Thanks. I added a link to photo.
https://drive.google.com/file/d/1Mxu...ew?usp=sharing
Just throwing it out there and don’t know for sure but would be curious if you are dealing with a metric/imperial mismatch. BCM is an American company and may have provided you with a screw that is sized via old school imperial. I am not sure if the 180 is sized with metric hardware or not. I am not terribly versed in modding the 180 or any rifle for that matter. Relatively new gun owner myself.
Let me know how it turns out. I was looking at the same grip.
I ended up replacing it with a hex bolt and washer that has it secured tight. Strange the other two screws wouldn't work, but it's on now and I like it.
https://drive.google.com/file/d/1h58...ew?usp=sharing
Like it.... thanks for the info! Rifle looks good with the stock too.
Any proper fix out for the magnet non recall bolt carriers yet?
OP'd by jbrow397:
We held court on the Internet and as usual, all parties are held in contempt.
A couple of us have had good luck with drilling out the old magnet and gluing in a larger/stronger one.
I used a stacked pair of these: https://www.amazon.ca/gp/product/B07BJ6FGQN