Hey Brian, any word on when some 300 blackout brass will be available?
Hey Brian, any word on when some 300 blackout brass will be available?
Id Rather Be Judged By 12 Than Carried By 6
I have all the tooling setup, just have been dealing with filling commercial orders of 5.56mm. We have also been essentially shut down in the shop for a couple of weeks due to the heat. Things are starting to wind back up this week. Based on current situation, I would say two weeks.
Perfect thanks for the reply! I will keep a look out for it
Id Rather Be Judged By 12 Than Carried By 6
** Updated 27 July 2018 **
This will be the final update before everything goes into production. Optical HS sorter is a bust. So it will be of mixed HS, for now... All HS are ones that convert correctly to correct neck thickness. You will need to deburr and chamfer the or run an expander ball through the neck. This is because north of 2,000 pieces per hour anything I tried to do with neck tension started changing other dimensions significantly.
OAL Length 1.360" +/-0.002" (98%)
Headspace SAAMI (-)0.003 +/- 0.001"
Neck Thickness Range 0.0105 - 0.0115"
Neck Tension - 0.302" (Very tight)
It has been a slow process, I know. However commercial loaders are my bread and butter, and they have been consuming all of my .223 / 5.56mm equipment time. I now have a bit of a break where I can get these small projects sorted out.
** Update 04 August 2018 **
300 BLK is now posted in the EE
Last edited by BlackSheepBrass; 08-06-2018 at 06:46 AM.
Your link links back to this thread, not the EE.
CSSA Member
Fixed it... Computers are hard.
Another batch has been posted. 15,000 pieces of 99% Remington .223 headstamp.