CanadianGunNutz.com logo, Firearms News and Classifieds in Canada

Page 1 of 11 123456789 ... LastLast
Results 1 to 10 of 108

Thread: DLASK ARMS CORP. *TUF-22* (Pre-Order Info)

  1. #1
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    1,064

    Wink DLASK ARMS CORP. *TUF-22* (Pre-Order Info)

    OK guys, here's the skinny on what I think will happen. So far we have given the 'OK' to HC3R to start producing the magazines. The lead time is now 2 months from us paying the deposit which should be next week sometime. What takes the longest is for production of the steel feed lip blocks and then final assembly and packaging. So ETA (as of now) on receiving the mags is June'ish sometime. We will obviously expedite where we can to try to cut this down.

    In the meantime we are producing the TUF-22 receivers and have placed another order for material to make it a total of 400 pcs for this initial run. Only the first 100 will be from the numbered, limited run and after that the rest will be a mix of Pic railed, flat topped and the TX threaded variety. ALL of the first 100 will be the standard 0 MOA Pic railed version, please do not ask for other variations we are just far too busy at this time to do custom tinkering.

    Now, we have had so many requests for specific numbers out of the limited first run and we don't mind doing our best to accommodate these requests where possible but we cannot do it over this forum. So, to that end, I am asking everyone that is interested in a specific number to send me an email at..... :

    info@dlaskarms.com

    .....with the number you wish to have. If it is not already spoken for then we will put your name on the list. Please send me a few alternate numbers in case your first choice is spoken for and unavailable. We will ONLY be doing this for the first 100 units so please don't ask for anything higher. Once you have received a confirmation email about your specific number choice we ask you to please not contact us again. What will happen is we will call or email you once they are ready to ship and get your payment info etc. This saves me innumerable hours of time and effort and will only delay the project further.

    Pricing for the receivers by themselves will be in the $239.99 range and complete TUF-22 'Basic' rifles (same as the current DAR-22 but with a 25 round TUF-22 mag included) will start at $759.99. These prices are pretty firm at this time but are subject to change without notice due to unforeseen circumstances.

    The new 25 round magazines are slated to have an MSRP of $44.99 Cdn. This slight increase over the previous 10/22 version is due to the costs of having to modify the mold, labor to get the project approved and going and for changing the packaging etc.

    We have some pretty good contacts across Canada for sales but ask you to PLEASE contact your FLGS and ask them to contact us for dealer sales of the magazines as we WILL NOT be selling them ourselves on a retail basis because we are the distributors.



    Annnnd GO !
    Cheers,
    Leigh
    Dlask Arms Corp.

  2. #2
    Big Mouth Mike112288's Avatar
    Join Date
    Nov 2011
    Location
    Winkler
    Posts
    1,285
    Are the barrels threaded into the receiver or can we install any 10/22 barrel on that receiver?

  3. #3
    CGN Regular Steel28's Avatar
    Join Date
    Oct 2009
    Location
    Ontario, CANADA
    Posts
    540
    Email sent!

  4. #4
    HELP! I sold my soul to the internet Mr. Friendly's Avatar
    Join Date
    Apr 2008
    Location
    British Canuckistan
    Posts
    4,376
    pricing info? better pics and images?
    power corrupts, but absolute power is kinda cool!

  5. #5
    Member Pointdexter's Avatar
    Join Date
    Mar 2011
    Location
    Lower Mainland
    Posts
    59
    Quote Originally Posted by Steel28 View Post
    Email sent!

    ditto

  6. #6
    Member
    Join Date
    Dec 2017
    Location
    British Columbia
    Posts
    68
    Email sent

  7. #7
    HELP! I sold my soul to the internet geologist's Avatar
    Join Date
    Jun 2004
    Location
    Lower Mainland, BC
    Posts
    15,074
    Email sent.
    "Conservation is the mark of a dying civilization. When your technology is not increasing at the same rate as your population growth you are done. Bring on the next contender.".

  8. #8
    CGN Regular
    Join Date
    Aug 2012
    Location
    Southern Ontario
    Posts
    350
    Im In

    Man this has been a pricey spring. Lots of cool stuff coming out.
    Take someone shooting - Encourage someone to get a Pal/ RPal

  9. #9
    HELP! I sold my soul to the internet rommelrommel's Avatar
    Join Date
    May 2007
    Posts
    6,309
    Quote Originally Posted by Mike112288 View Post
    Are the barrels threaded into the receiver or can we install any 10/22 barrel on that receiver?
    Barrels are normal, only the TX version will be threaded.

  10. #10
    Member
    Join Date
    Dec 2017
    Posts
    47
    email sent,
    Thank you

Page 1 of 11 123456789 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •