Page 1 of 9 123456789 LastLast
Results 1 to 10 of 83

Thread: Received a BCL 102

  1. #1
    Newbie
    Join Date
    Jan 2013
    Location
    YYC
    Posts
    18

    Received a BCL 102

    Well I was fortunate enough to get my hands on a BCL102. I ordered it in December and received it Thursday evening. I got 1 of the 21 Burnt Bronze models.
    If you don't know a BCL102 is a AR-102 in 308 that is built in Canada and isn't restricted.
    I added a vortex strike eagle 1-6x24, a vortex cantilever mount, Tyrant Designs for grip, Ozark Armament 45 degree chanted BUIS. BCL blast shield and an Ergo Deluxe grip, that fits poorly.
    I got a MFT Battlelink minimalist stock but I got the wrong size, so I'll update that soon.
    I want to put a new trigger in it but I'm going to wait until I have a couple 100 rounds through it.

    The effort and customer service by Ryan and the folks at SFRC has set a new standard to how I will judge retail sources. Ryan called me personally and kept me aware of any delays and the product I received far surpasses my expectations.
    The extras Ryan included were almost too much... almost lol. I won't say what they were because Ryan shouldn't be held to that standard. Thank you Ryan.

    I have 12 mags, the factory mag and CPD 10 round mags drop out perfectly, pmags are a little sticky.








    .........

  2. #2
    Newbie
    Join Date
    Jan 2013
    Location
    YYC
    Posts
    18
    Only thing is I can't figure out how to remove the hand guard

  3. #3
    CGN Ultra frequent flyer tharkhold's Avatar
    Join Date
    Apr 2008
    Location
    NCR//RCN (Ottawa/Gatineau)
    Posts
    3,702
    Quote Originally Posted by jayhad View Post
    Only thing is I can't figure out how to remove the hand guard
    uncrew the 6 screws and pull

    This is the barrel nut under the handguard, yours probably has lightening holes in it.

    'nada

  4. #4
    Newbie
    Join Date
    Jan 2013
    Location
    YYC
    Posts
    18
    ewww that doesn't make me feel good. I pulled the Allen screws and pulled, nothing, had a buddy come over and we both pulled, nothing. I thought I was missing something because it won't budge.

    Makes me wonder how they got it on there.

  5. #5
    CGN Ultra frequent flyer tharkhold's Avatar
    Join Date
    Apr 2008
    Location
    NCR//RCN (Ottawa/Gatineau)
    Posts
    3,702
    Quote Originally Posted by jayhad View Post
    ewww that doesn't make me feel good. I pulled the Allen screws and pulled, nothing, had a buddy come over and we both pulled, nothing. I thought I was missing something because it won't budge.

    Makes me wonder how they got it on there.
    wd40 overnight and try again.

    OR

    put upper in the freezer, then heat up the handguard where the nut it and pull
    'nada

  6. #6
    CGN Regular Steve_B's Avatar
    Join Date
    Jan 2017
    Posts
    379
    How was your takedown pin?
    (I've tried both a punch and a round with both heel of palm and clenched fist without even a hint of budging the pin.)
    CSSA and now - on Trudeau's recommendation - CCFR

  7. #7
    CGN frequent flyer Dr. Hunter's Avatar
    Join Date
    Dec 2012
    Location
    Edmonton
    Posts
    1,336
    Lifted weights for 20 years in preparation. Then I used Kroil and left it overnight in the freezer and then put it in a vice and went to town on it with a pipe wrench and screamed by the power of grey skull to see if I could turn into he man.

    My take down pins are stiff I use a punch and hammer... every time

  8. #8
    CGN frequent flyer Dr. Hunter's Avatar
    Join Date
    Dec 2012
    Location
    Edmonton
    Posts
    1,336
    The burnt bronze looks awesome though

  9. #9
    CGN Ultra frequent flyer m39a2's Avatar
    Join Date
    Nov 2004
    Location
    Edmonton Area
    Posts
    3,495
    Why do you want to remove the handguard?

    Scott
    "Happy to meet, sorry to part, happy to meet again"

  10. #10
    CGN Regular oddball_ted's Avatar
    Join Date
    Mar 2011
    Location
    Calgary
    Posts
    582
    Quote Originally Posted by Dr. Hunter View Post
    Lifted weights for 20 years in preparation. Then I used Kroil and left it overnight in the freezer and then put it in a vice and went to town on it with a pipe wrench and screamed by the power of grey skull to see if I could turn into he man.

    My take down pins are stiff I use a punch and hammer... every time
    Grey skull?!?
    I've been looking for a he-man sword on eBay/Kijiji for 21 years to no avail.

    That's some serious business 'rite ther'
    Last edited by oddball_ted; 04-15-2018 at 11:46 PM.
    Are you allowed to eat doughnuts private Pyle?

Page 1 of 9 123456789 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •