[url=https://postimg.cc/image/zexjkq98r/][/URL][url=https://postimg.cc/image/qwo3gckpn/][/URL][url=https://postimg.cc/image/ycnd26ipn/][/UR
[url=https://postimg.cc/image/8h3mixbq3/][/URL]
Bought the 1000 round bulk they offer back in Feb
Few issues I've had in roughly 200 rounds, all in my CZ 75b
1 squib
some heavily over crimped cases
noticeable differences in recoil either over or under charged I would assume
but most importantly primers not pressed in completely or straight as in the photo's and leaving sections above the case, my last range trip I loaded a few mags and on the last one I released the slide it slams shut and fires off a round (yes still safely pointed down range), cleared the pistol found the case and the primer was completely flush no primer strike, got back to my house grabbed a few handfuls and took a closer look and found another case which in the one in the photo's
I figure I can't be the only guy to have issues.. or if I am maybe it was limited to a small run not sure but if you bought this same ammo I would just take a look as you load rounds to verify each primer is correct.
I sent them an email as well to let them know they might have an issue see what they have to say.
***edit the photo with the 2 rounds one was set perfectly out of the box you can see the second sadly, I forgot to grab the fired case when I left the range to take a photo of it***
If you bought this same stuff and have had issues send them a email too hopefully they can get it sorted out on the machines.
[url=https://postimg.cc/image/8h3mixbq3/][/URL]
Bought the 1000 round bulk they offer back in Feb
Few issues I've had in roughly 200 rounds, all in my CZ 75b
1 squib
some heavily over crimped cases
noticeable differences in recoil either over or under charged I would assume
but most importantly primers not pressed in completely or straight as in the photo's and leaving sections above the case, my last range trip I loaded a few mags and on the last one I released the slide it slams shut and fires off a round (yes still safely pointed down range), cleared the pistol found the case and the primer was completely flush no primer strike, got back to my house grabbed a few handfuls and took a closer look and found another case which in the one in the photo's
I figure I can't be the only guy to have issues.. or if I am maybe it was limited to a small run not sure but if you bought this same ammo I would just take a look as you load rounds to verify each primer is correct.
I sent them an email as well to let them know they might have an issue see what they have to say.
***edit the photo with the 2 rounds one was set perfectly out of the box you can see the second sadly, I forgot to grab the fired case when I left the range to take a photo of it***
If you bought this same stuff and have had issues send them a email too hopefully they can get it sorted out on the machines.
Last edited: