Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: *PREMIUM* 1911 Gunsmith Kits @ Dlask Arms Corp.

  1. 04-27-2018, 03:14 PM #1
    Dlask Arms
    Dlask Arms is offline
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    3,001

    *PREMIUM* 1911 Gunsmith Kits @ Dlask Arms Corp.

    We have been asked many times in the past to sell 'kits' that have the difficult task of fitting the slide / frame already done and ready to accept the internal parts. We had some 80% frames sets left after last June's ban that we had to serialize anyways and though what the heck, let's make them into Gunsmithing Kits.

    Josef spent a few weeks personally fitting the slides and frames to perfection and what we have now are heritage quality barrel / frame / slide combos that you can purchase to build into your own version of the perfect 1911 (for you!).

    Please keep in mind that these are all serialized and registered so you do require a valid RPAL to purchase. If you require the internal parts to finish them just send an email and ask, we have all of the parts in different materials and configurations.

    https://dlaskarms.com/products/premi...o-ss-commander
    Cheers,
    Leigh
    Dlask Arms Corp.
    www.dlaskarms.com

    “Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”
    Reply With Quote Reply With Quote
  2. 04-27-2018, 05:09 PM #2
    Marilius
    Marilius is offline
    CGN Regular Marilius's Avatar
    Join Date
    May 2012
    Location
    Edmonton
    Posts
    503
    Just to clarify, these are finished frame slide barrel combos that require all the other parts, or are they partially completed which require additional drilling etc?
    Reply With Quote Reply With Quote
  3. 04-27-2018, 05:22 PM #3
    Dlask Arms
    Dlask Arms is offline
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    3,001
    Quote Originally Posted by Marilius View Post
    Just to clarify, these are finished frame slide barrel combos that require all the other parts, or are they partially completed which require additional drilling etc?
    The frame and slide have been fitted to each other. All of the holes, milling and EDM work etc. has been done so the only thing left is to fit / install the internal components to finish it into a functioning pistol. It is the perfect way to get a frame / slide set to complete your own build without needing to be a machinist and having to go through the entire frame /slide fitting process.

    These are the same sets we use to make our full custom 1911 pistols.
    Cheers,
    Leigh
    Dlask Arms Corp.
    www.dlaskarms.com

    “Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”
    Reply With Quote Reply With Quote
  4. 04-27-2018, 05:32 PM #4
    Marilius
    Marilius is offline
    CGN Regular Marilius's Avatar
    Join Date
    May 2012
    Location
    Edmonton
    Posts
    503
    Just to continue to bother you, would it be feasible to swap out what is certainly a 45acp barrel with a 9mm one?
    Reply With Quote Reply With Quote
  5. 04-27-2018, 09:45 PM #5
    calvados.boulard
    calvados.boulard is offline
    CGN frequent flyer
    Join Date
    Nov 2010
    Location
    Victoria BC
    Posts
    1,229
    Yeah...this ^^^
    Reply With Quote Reply With Quote
  6. 04-27-2018, 11:36 PM #6
    B.C.Jay
    B.C.Jay is offline
    CGN Regular
    Join Date
    Feb 2015
    Location
    Kootenays, BC
    Posts
    164
    me too.
    I'd be in for a 9mm version
    Reply With Quote Reply With Quote
  7. 04-27-2018, 11:55 PM #7
    docscoutjr
    docscoutjr is offline
    Uber Super GunNutz docscoutjr's Avatar
    Join Date
    Jan 2009
    Posts
    395
    9mm 9mm 9mm
    And would it be too much to ask for a fitted bushing? Will take it from there.
    Reply With Quote Reply With Quote
  8. 04-28-2018, 10:49 AM #8
    The_Shmoo
    The_Shmoo is offline
    CGN Regular
    Join Date
    Feb 2010
    Location
    Missisauga, ON
    Posts
    684
    Do you have any kits available in gov't length as opposed to commander?
    Are you familiar with The Shmoo, Mr. Fisher?
    Reply With Quote Reply With Quote
  9. 04-28-2018, 12:41 PM #9
    Dlask Arms
    Dlask Arms is offline
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    3,001
    Quote Originally Posted by Marilius View Post
    Just to continue to bother you, would it be feasible to swap out what is certainly a 45acp barrel with a 9mm one?
    So sorry guys I should have mentioned, they are 9mm kits !
    Cheers,
    Leigh
    Dlask Arms Corp.
    www.dlaskarms.com

    “Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”
    Reply With Quote Reply With Quote
  10. 04-28-2018, 02:18 PM #10
    DealersAdvocate
    DealersAdvocate is offline
    CGN Regular DealersAdvocate's Avatar
    Join Date
    Oct 2009
    Location
    Kawartha Lakes, Ontario
    Posts
    323
    These look awsome!

    For someone who has never assembled a 1911 before, are they more difficult to build than an AR-15?
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules