Here is Krieger's response to AR inquiry:
"The 18" we offer cannot be finished at 18.5", but the DCM can be cut back to 18.5" and rethreaded if need be. This is a more expensive option
But it can be done."
Here is Krieger's response to AR inquiry:
"The 18" we offer cannot be finished at 18.5", but the DCM can be cut back to 18.5" and rethreaded if need be. This is a more expensive option
But it can be done."
http://www.hirschprecision.com/
Peter - If you were to order a M1A Krieger stainless heavy 22" 1x10 twist, what would be the expected wait time currently?
hend238, about 6 moths, but judging from interest we will try and stock these barrels.
Peter
http://www.hirschprecision.com/
Please look at Krieger site- overstocked barrels- we can get these.
Then please contact us directly at info@hirschprecision.com should you wish to order.
http://www.hirschprecision.com/
Hi Peter,
I was taking a look at Krieger's overstocked barrel list as suggested and I see that many M1A heavy pattern barrels are listed. A few are detailed as "M1A Hvy Mod". I'm assuming "mod" means modified? Can you elaborate on this? Thanks.
any chance on a .308 M24 profile 5r in 1/11.25 ?
PGW fan
Regarding over stocked barrel, please provide part number and we can ask Krieger for specs.
http://www.hirschprecision.com/
We have an 11T M24 4 groove - just as accurate and Bartlien Rem Varmint(close).30 11.25T 5R.
Will check on M24 11.25T 5R.
Last edited by peterdobson; 05-20-2018 at 05:13 PM.
http://www.hirschprecision.com/