FREE HANGER with every Titanium Carbide Targets!

[Insite Arms]

T21 is a titanium-carbide wear-plate that provides superior welding and forming characteristics without increasing the hardness of the steel. Wearlife is greater than conventional 500 BHN products, thereby reducing replacement frequency and resulting costs. T21 has an abrasion resistance greater than conventional 500 BHN grades and at least twice the wearlife of 400 BHN grades.

Exactly

[Insite Arms]

More info please, cost seems pretty reasonable.

Please email for shipping quotes
Also feel free to call anytime for advice on target set up to suit your situation
780.808.1117

[charlesquik]

So we cant shoot it with ar-15 if we gotta keep it under 2850 fps....

[Pottst]

I don’t think that’s what he was saying. You’ll cause minimal marking on the steel under 2850 over that I’m sure the longevity of the target may be reduced. I’m definately in for some target hangers, are these stocked regularly?

[rommelrommel]

So we cant shoot it with ar-15 if we gotta keep it under 2850 fps....

Only the lightest bullets out of the longest barrels at the shortest ranges are gonna be over that really, especially if you stretch it to 3k.

[Insite Arms]

So we cant shoot it with ar-15 if we gotta keep it under 2850 fps....

ARs are no problem but keep in mind shooting at 50 yards T21 nor AR500 will last forever
....3/8 would be a better choice if the ranges are short and the impacts on the fast side

[ShawnC6]

So we cant shoot it with ar-15 if we gotta keep it under 2850 fps....

By 100 yards even a 3300 fps 55gr is probably around 2850 fps.

Remember velocities are usually at the muzzle and then start slowing down.

[SigWig]

Tag

[Insite Arms]

We are using these targets on a few stages at the SAPRL event in Taber this weekend and looking forward to everyone's feedback!
Current special now on: Free Hanger with any steel Target

[CZ_Silhouetter]

We are using these targets on a few stages at the SAPRL event in Taber this weekend and looking forward to everyone's feedback!
Current special now on: Free Hanger with any steel Target

Thank you Insite for bringing your targets out to the match!

I bought a 1/4" thick 33% IPSC and a 3/8" 50% IPSC at the match and took them out for a fathers day shoot with my dad. You guys were right the 1/4" has a much louder ring to it, as dad said "it sounds like an old cast iron bell!!!".

The target hanger design for a T-post is super slick awesome work guys I'll have to get some more at the next match.

These were shot from 50 - 150 yards with .22lr I can't wait to get the 6 and 6.5's on these and hear them ring.