Please click picture for link to site
697.24 USD
308 complete build kit
Barrel 20" RIFLE-LENGTH .308 WIN 1/10 STAINLESS STEEL BARREL
Gas System: Rifle-length
Barrel Profile: Heavy
Barrel Steel: 416R
Barrel Finish: Stainless Steel
Muzzle Thread: 5/8-24
Chamber: .308 WIN
Twist Rate: 1/10
Barrel Extension: M4
Diameter at Gas Block: .750
Inc.
a. Gas block, standard for 308
b. Gas tube
c. A2 brake and crush washer
d. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.
e. Charging handle
f. 15” Midwest Ind 15" MLok.
Magpul MOE rear stock kit:
a. Magpul MOE rear stock
b. Spring
c. Buffer
d. Castle nut
e. Tube
f. Magpul Grip not shown but included
Please click picture for link to site
741.43USD
6.5 Creed complete build pkg
Barrel 20" RIFLE-LENGTH 6.5 Creedmoor 1/10 STAINLESS STEEL BARREL
Gas System: adjust Rifle-length
Barrel Profile: Heavy
Barrel Steel: 416R
Barrel Finish: Stainless Steel
Muzzle Thread: 5/8-24
Chamber: 6.5 Creedmoor
Twist Rate: 1/8
Barrel Extension: M4
Diameter at Gas Block: .750
Inc.
a. Gas block adjustable for the 6.5
b. Gas tube
c. A2 brake and crush washer
d. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.
e. Charging handle
f. 15” Midwest Ind 15" MLok.
Magpul MOE rear stock kit:
a. Magpul MOE rear stock
b. Spring
c. Buffer
d. Castle nut
e. Tube
f. Magpul Grip included but not shown
Please click picture for link to site
497.24USD
308 Basic parts kit
Barrel 20" RIFLE-LENGTH .308 WIN 1/10 STAINLESS STEEL BARREL
Gas System: Rifle-length
Barrel Profile: Heavy
Barrel Steel: 416R
Barrel Finish: Stainless Steel
Muzzle Thread: 5/8-24
Chamber: .308 WIN
Twist Rate: 1/10
Barrel Extension: M4
Diameter at Gas Block: .750
Inc.
a. Gas block, standard for 308
b. Gas tube
c. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.
rear stock kit:
a. Spring
b. Buffer
c. Castle nut
d. Tube
To finish the kit you will need the following:
1. Rear stock for a mil spec buffer tube
2. Flash Hider for a 308 5/8x24 threads
3. Handguard of your choice, Must be for 308 and have a 210 Tang for a perfect fit (Please make sure you order the right handguard as there will be no returns)
4. Charging handle of your choice
5. crush washer
Please click picture for link to site
541.43USD
6.5 creedmoor basic parts kit
Barrel 20" RIFLE-LENGTH 6.5 Creedmoor WIN 1/10 STAINLESS STEEL BARREL
Gas System: Rifle-length
Barrel Profile: Heavy
Barrel Steel: 416R
Barrel Finish: Stainless Steel
Muzzle Thread: 5/8-24
Chamber: 6.5 Creedmoor
Twist Rate: 1/8
Barrel Extension: M4
Diameter at Gas Block: .750
Inc.
a. Gas block, Adjust 6.5 Creed
b. Gas tube
c. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.
rear stock kit:
a. Spring
b. Buffer
c. Castle nut
d. Tube
To finish the kit you will need the following:
1. Rear stock for a mil spec buffer tube
2. Flash Hider for a 308 5/8x24 threads
3. Handguard of your choice, Must be for a 308 and have a 210 Tang for a perfect fit (Please make sure you order the right handguard as there will be no returns)
4. Charging handle of your choice
5. crush washer
Please click picture for link to site
$409.99 USD
NR STAG 10 UPPER/LOWER COMBO
Description
The Stag 10 upper receiver assembly includes a picatinny rail on the top, dust cover, and installed forward assist. The Stag 10 lower receiver includes an installed lower parts kit.
Our upper receiver uses a DPMS High Profile, tang height of .210. It uses the same barrel nut threads as DPMS, accepts DPMS barrels, accepts Stag, Armalite and DPMS BCG's and Charging Handles.
Our lower receiver will accept any standard DPMS magazine, buffer and buffer spring. It will also work with any AR15 Stock.
Requires 18.5" or longer barrel to be NR
Finished Rifle
10 rounds, various ammo. 100 yards.