Page 1 of 19 12345678911 ... LastLast
Results 1 to 10 of 189

Thread: 4 options to complete your Stag 10 NR rifle., 308 and 6.5 Creed avail 497.24USD & up

  1. #1
    Business Member IRUNGUNS's Avatar
    Join Date
    Jul 2012
    Posts
    4,739

    4 options to complete your Stag 10 NR rifle., 308 and 6.5 Creed avail 497.24USD & up

    Name:  071318071318.jpg
Views: 10570
Size:  39.1 KB
    Please click picture for link to site
    697.24 USD

    308 complete build kit
    Barrel 20" RIFLE-LENGTH .308 WIN 1/10 STAINLESS STEEL BARREL
    Gas System: Rifle-length
    Barrel Profile: Heavy
    Barrel Steel: 416R
    Barrel Finish: Stainless Steel
    Muzzle Thread: 5/8-24
    Chamber: .308 WIN
    Twist Rate: 1/10
    Barrel Extension: M4
    Diameter at Gas Block: .750

    Inc.
    a. Gas block, standard for 308
    b. Gas tube
    c. A2 brake and crush washer
    d. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.
    e. Charging handle
    f. 15” Midwest Ind 15" MLok.

    Magpul MOE rear stock kit:
    a. Magpul MOE rear stock
    b. Spring
    c. Buffer
    d. Castle nut
    e. Tube
    f. Magpul Grip not shown but included

    Name:  071318071318.jpg
Views: 10570
Size:  39.1 KB
    Please click picture for link to site
    741.43USD

    6.5 Creed complete build pkg
    Barrel 20" RIFLE-LENGTH 6.5 Creedmoor 1/10 STAINLESS STEEL BARREL
    Gas System: adjust Rifle-length
    Barrel Profile: Heavy
    Barrel Steel: 416R
    Barrel Finish: Stainless Steel
    Muzzle Thread: 5/8-24
    Chamber: 6.5 Creedmoor
    Twist Rate: 1/8
    Barrel Extension: M4
    Diameter at Gas Block: .750

    Inc.
    a. Gas block adjustable for the 6.5
    b. Gas tube
    c. A2 brake and crush washer
    d. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.
    e. Charging handle
    f. 15” Midwest Ind 15" MLok.

    Magpul MOE rear stock kit:
    a. Magpul MOE rear stock
    b. Spring
    c. Buffer
    d. Castle nut
    e. Tube
    f. Magpul Grip included but not shown


    Name:  071418071418.jpg
Views: 10514
Size:  27.7 KB
    Please click picture for link to site
    497.24USD
    308 Basic parts kit
    Barrel 20" RIFLE-LENGTH .308 WIN 1/10 STAINLESS STEEL BARREL
    Gas System: Rifle-length
    Barrel Profile: Heavy
    Barrel Steel: 416R
    Barrel Finish: Stainless Steel
    Muzzle Thread: 5/8-24
    Chamber: .308 WIN
    Twist Rate: 1/10
    Barrel Extension: M4
    Diameter at Gas Block: .750

    Inc.
    a. Gas block, standard for 308
    b. Gas tube
    c. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.

    rear stock kit:
    a. Spring
    b. Buffer
    c. Castle nut
    d. Tube

    To finish the kit you will need the following:

    1. Rear stock for a mil spec buffer tube
    2. Flash Hider for a 308 5/8x24 threads
    3. Handguard of your choice, Must be for 308 and have a 210 Tang for a perfect fit (Please make sure you order the right handguard as there will be no returns)
    4. Charging handle of your choice
    5. crush washer



    Name:  071418071418.jpg
Views: 10514
Size:  27.7 KB
    Please click picture for link to site
    541.43USD

    6.5 creedmoor basic parts kit
    Barrel 20" RIFLE-LENGTH 6.5 Creedmoor WIN 1/10 STAINLESS STEEL BARREL
    Gas System: Rifle-length
    Barrel Profile: Heavy
    Barrel Steel: 416R
    Barrel Finish: Stainless Steel
    Muzzle Thread: 5/8-24
    Chamber: 6.5 Creedmoor
    Twist Rate: 1/8
    Barrel Extension: M4
    Diameter at Gas Block: .750

    Inc.
    a. Gas block, Adjust 6.5 Creed
    b. Gas tube
    c. BCG- 9310 steel bolt assembly, nitride treated for durability. 8620 carrier, with a nitride treated gas key properly staked with grade 8 fasteners.

    rear stock kit:
    a. Spring
    b. Buffer
    c. Castle nut
    d. Tube

    To finish the kit you will need the following:

    1. Rear stock for a mil spec buffer tube
    2. Flash Hider for a 308 5/8x24 threads
    3. Handguard of your choice, Must be for a 308 and have a 210 Tang for a perfect fit (Please make sure you order the right handguard as there will be no returns)
    4. Charging handle of your choice
    5. crush washer


    Name:  062518062518 photo.JPG
Views: 10538
Size:  49.7 KB
    Please click picture for link to site
    $409.99 USD


    NR STAG 10 UPPER/LOWER COMBO


    Description
    The Stag 10 upper receiver assembly includes a picatinny rail on the top, dust cover, and installed forward assist. The Stag 10 lower receiver includes an installed lower parts kit.

    Our upper receiver uses a DPMS High Profile, tang height of .210. It uses the same barrel nut threads as DPMS, accepts DPMS barrels, accepts Stag, Armalite and DPMS BCG's and Charging Handles.

    Our lower receiver will accept any standard DPMS magazine, buffer and buffer spring. It will also work with any AR15 Stock.

    Requires 18.5" or longer barrel to be NR


    Finished Rifle
    Name:  20180713_112800 (002).jpg
Views: 10539
Size:  146.8 KB
    Name:  Groupings.jpg
Views: 10160
Size:  90.5 KB
    10 rounds, various ammo. 100 yards.
    Last edited by IRUNGUNS; 07-16-2018 at 01:17 PM.


    Flat rate shipping to Canada is 25.00USD on all accessory and ammunition orders regardless of quantities ordered. Firearms are exported to Canada at a flat rate of 25.00USD per firearm.

    The IRUNGUNS Team

    www.irunguns.ca
    www.irunguns.com

  2. #2
    CGN Ultra frequent flyer drift1122's Avatar
    Join Date
    Jan 2012
    Location
    Delta Tango
    Posts
    2,277
    Any kits without the bolt? Maybe a lighter barrel?
    CCFR/NFA

  3. #3
    BANNED
    Join Date
    Aug 2008
    Location
    Ontario
    Posts
    2,430
    Quote Originally Posted by drift1122 View Post
    Any kits without the bolt? Maybe a lighter barrel?
    How many options do you want them to provide? If you don't like those, put your own together... SMH

  4. #4
    Business Member IRUNGUNS's Avatar
    Join Date
    Jul 2012
    Posts
    4,739
    Quote Originally Posted by drift1122 View Post
    Any kits without the bolt? Maybe a lighter barrel?
    For now these are the only packages we will be providing.


    Flat rate shipping to Canada is 25.00USD on all accessory and ammunition orders regardless of quantities ordered. Firearms are exported to Canada at a flat rate of 25.00USD per firearm.

    The IRUNGUNS Team

    www.irunguns.ca
    www.irunguns.com

  5. #5
    CGN Ultra frequent flyer drift1122's Avatar
    Join Date
    Jan 2012
    Location
    Delta Tango
    Posts
    2,277
    I'm offended, how dare you!



    Quote Originally Posted by BooSSted View Post
    How many options do you want them to provide? If you don't like those, put your own together... SMH
    CCFR/NFA

  6. #6
    CGN Ultra frequent flyer drift1122's Avatar
    Join Date
    Jan 2012
    Location
    Delta Tango
    Posts
    2,277
    Thx



    Quote Originally Posted by IRUNGUNS View Post
    For now these are the only packages we will be providing.
    CCFR/NFA

  7. #7
    CGN Regular nidh0gg's Avatar
    Join Date
    May 2017
    Location
    BC
    Posts
    134
    Do you offer gun smithing services if we order a complete rifle (of parts)? Also, whats the weight of the finished gun?

  8. #8
    Business Member IRUNGUNS's Avatar
    Join Date
    Jul 2012
    Posts
    4,739
    Quote Originally Posted by nidh0gg View Post
    Do you offer gun smithing services if we order a complete rifle (of parts)?
    If there are enough requests and time allows it, it is a possibility.
    You can send an e-mail to JF at jf@irunguns.ca and he will let you know if we are able to offer that service.


    Flat rate shipping to Canada is 25.00USD on all accessory and ammunition orders regardless of quantities ordered. Firearms are exported to Canada at a flat rate of 25.00USD per firearm.

    The IRUNGUNS Team

    www.irunguns.ca
    www.irunguns.com

  9. #9
    CGN Regular tinman304's Avatar
    Join Date
    Jan 2015
    Location
    Burlington/Oakville
    Posts
    562
    Quote Originally Posted by nidh0gg View Post
    Do you offer gun smithing services if we order a complete rifle (of parts)? Also, whats the weight of the finished gun?
    I'm also wondering if you could offer assembly. By the time I buy the proper tools and headspace gauges the savings are pretty much gone....

    Edit: just noticed you already answered the question

  10. #10
    CGN Regular
    Join Date
    May 2013
    Location
    Lower Mainland
    Posts
    338
    Can you tell us the weight of the barrel

Page 1 of 19 12345678911 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •