 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
We run every part through several QC processes, so "try" to catch any issues before they go out the door. We are however mostly human so occassionally things do get out that should not have, in these rare cases we do everything possible to make it right.Originally Posted by edge9382
Alberta Tactical Rifle Supply
Canada's Premier Precision Rifle Manufacturer
Please email all inquiries to info@albertatacticalrifle.com NOT through PMs
The Province of Alberta has been suffering for the last 30 plus years with an EAST infection
http://www.albertatacticalrifle.com/
Long Distance is BETTER than being there
First up we have: a Lantac BCG, elfman push button safety, Battle Arms Development grip, Geisselle trigger, CMC Anti-walk trigger pins, V7 titanium grip screw - All fit no problems at all.
We did discover that the hole in an A2 grip is slightly more forgiving than that found in the BAD, Ergo, Magpul, etc. grips. The spring was binding a little in these making the safety quite stiff.
Our solution: every receiver made so far is getting a free upgrade to a captured safety spring with a ball bearing detent as is found standard on our Modern Varmints / Hunters.
(set screw/bearing included spring sold seperately, or trim yours)
Next up: Battle Arms Development Handguard and faxxon flame fluted barrel, fit no problem at all.
Strike Industries Ultimate dust cover (plastic) fit, but very tight to close against the shell deflector and wants to pop open.
Our solution: The uppers are being adjusted to shift the shell deflector back approximately 0.010" to allow better clearance.
LAW tactical folder stock adapter fit without issue. Buffer tubes also fit without issue.
Knights armament ambi mag release - fits and functions ***however the big ugly button that they want to use on the front, does not fit.
The Odin works enlarged mag released does not fit on receivers serial numbered 1-100. Modifications are being made to all future receivers (anything not anodized already) to enlarge the space above the mag release slightly. Another brand that is slipping my mind DOES fit, either magpul or BAD? I'll get further details on that.
Phase 5 fits and functions fine. The Geissele maritime bolt catch DID NOT fit the pocket in the upper receiver. But it fit fine in the lower.
Our solution: We're going to enlarge the pocket on the upper to provide clearance.
BAD bolt catch functions fine. Troy ambi mag release functions fine.
The ATRS is a nice looking receiver set that is for sure. The billet is much beefier the a forged but that is to be expected.
CCFR — CSSA
Glad to hear that you're making it work for the maritime bolt catch as I already bought one. The rifles look amazing keep up the good work!
...
Last edited by jiffx2781; 05-18-2020 at 08:26 AM.
The battle arms magazine button works well and is similar to the Odin.
The handguard is a 17” battlearms rigid rail
The elftmann safety is a unique and uncommon part. If the detent ball won’t work, it’s definitely not the end of the world since most people are more comfortable with a rotary safety anyways.
A traditional ambi safety was also tried and worked great
I have the Strike Industries dust cover, Magpul mag button, and the Maritime bolt catch lol. Glad to hear that things are being adjusted.
What no picture of a dremel and a hammer with a caption “ custom tuning may be required for part fitment “ . You guys are awesome . Thank you for taking the time trying parts and posting results .
You sure the Handguard in the picture is 17” one?
Great !!!
Can we have you install the barrel, gas block and gas tube to the uppers for us ?
Posting Permissions
Reply With Quote
