Hey guys, since the MS isn't a "AR15" will a Magpul PRS stock fit/sync up perfectly with the MS lower? Like it does with a AR15? Or will it be too fat/skinny. tall/short and not line up correctly?
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Hey guys, since the MS isn't a "AR15" will a Magpul PRS stock fit/sync up perfectly with the MS lower? Like it does with a AR15? Or will it be too fat/skinny. tall/short and not line up correctly?
...
Last edited by jiffx2781; 05-18-2020 at 11:43 AM.
"Arguing with idiots is like playing chess with a pigeon..... No matter how good you are, the bird is going to s#!t on the board and strut around like it won anyway."
If any of you guys are looking for a rifle case, cabelas has the rangemaxx long range rifle case on for $59 right now. Very well made and comes in coyote brown. Worth the money for sure
Hitchvault.ca
Soft case, I thought it was a hard case I got super excited!!!!!Originally Posted by scottcullen
"This year will go down in history. For the first time, a civilized nation has full gun registration! Our streets will be safer, our police more efficient, and the world will follow our lead into the future."
Adolf Hitler, 1935
It’s stiff like a hard case, it doesn’t bend at all
Hitchvault.ca
I'm less than 30 past 223. I was expecting an August ship date but that ship has sailed. No big deal as I won't have time for my build before late September anyway.
BUT I'M STILL REALLY STOKED ABOUT THIS!!!!!!!!!
"We are not the kind of country where politicians get to tell the police what to do in operational matters" - Trudeau in Munich, February 17 2020...
CF, CCFR, CSSA, NFA, JP, AF&AM
Has anyone used a JP silent captured spring buffer in one of these? I’m having issues with my setup, thinking about ordering a Lantac e-bcg and JP buffer kit
I’ve built lots with the JP SCS and never had a problem.
Can you post a build list and what is exactly wrong with your MS?
CGN Weekly Schedule
Monday: Can't access the EE! Tuesday: Non-restricted rifles like AR-15? Wednesday: Difference between 223 and 556? Thursday: 9 or 45? Friday: Bear Defense thread Saturday: Why is this prohibited? Sunday: Zombie thread
...
Last edited by jiffx2781; 05-18-2020 at 11:44 AM.
"Arguing with idiots is like playing chess with a pigeon..... No matter how good you are, the bird is going to s#!t on the board and strut around like it won anyway."
I built it with the following parts
Faxon 18.6” Gunner .223 Wylde rifle length gas
Faxon .625” low pro gas block
Faxon G2 15” handguard
Ergo enhanced lpk
Bcm pnt trigger assembly
Used the following parts from a brand new m&p:
Buffer tube
Spring
Buffer
Bcg
The issue I was having is the bolt seems excessively tight in the carrier. Every couple round I would get a strange “twang” sound in the buffer, and there would be a round jammed under the bolt and gouged along the casing. I dumped a rediculous amount of oil into it and got the last 20 off without a hiccup. Tried Winchester 55gr bulk and hornady black 62gr. Ejection is consistently around the 3-4 position. I ran it wet to begin with, and have cleaned it, but when inserting the bolt into the carrier there still feels to be excessive force required to move it, almost like it snaps into place.
Posting Permissions
Reply With Quote