Is 2 turns out with the buffer tube going to be to much and weaken the system? Doing the measurements I'm going to need 2 turns out for enough clearance for reliability. Just not sure how many threads can be left out before things start to weaken.
Is 2 turns out with the buffer tube going to be to much and weaken the system? Doing the measurements I'm going to need 2 turns out for enough clearance for reliability. Just not sure how many threads can be left out before things start to weaken.
I want you to be pleased with your purchase, so do not hesitate one bit to ask questions before purchase! If we do decide to go forward with payment, I assume that you are satisfied with all info provided before payment. This is a polite as-is disclaimer.
I ship at least once a week on my day off.
Thanks.
I have a mag release and a forward assist.
Are bolt catch and bolt release are same part? Or two parts? Anyone using an extended bolt release (specifically from phase 5)?
I forgot about the ejection port cover - I have been reading here that some work and some don`t - what should I be looking for?
...
Last edited by jiffx2781; 05-18-2020 at 12:34 PM.
"Arguing with idiots is like playing chess with a pigeon..... No matter how good you are, the bird is going to s#!t on the board and strut around like it won anyway."
I had no issues with a DPMS cover.
Nvm..
Last edited by P11; 01-28-2020 at 11:08 PM.
I want you to be pleased with your purchase, so do not hesitate one bit to ask questions before purchase! If we do decide to go forward with payment, I assume that you are satisfied with all info provided before payment. This is a polite as-is disclaimer.
I ship at least once a week on my day off.
I'm sure this has been covered before, but going through all 180 pages is daunting.
Has anyone put together a MS in .308 or even 7.62x39?
I understand with the discontinuation of the slick side uppers which had huge ejection ports this might be trickier with the FA uppers.
anyone care to point me in the right direction? I have a friend thats working on a .223 wylde build but thought it would be cool to have one for coyotes and one for bigger things.