Page 1 of 7 1234567 LastLast
Results 1 to 10 of 64

Thread: WK-180c alternative handguards

  1. #1
    Business Member True North Arms Corp's Avatar
    Join Date
    Sep 2016
    Location
    GTA
    Posts
    1,548

    WK-180c alternative handguards

    We're getting a lot of questions about replacement WK-180c handguards. These two handguards are tested to fit over the WK's larger gas block.

    Some folks are getting away with sliding these right onto the WK's barrel nut. For optimal rigidity you might need to use the barrel nut that comes with the handguard.

    Lots of colour and length options up to 17".


    Super M-LOK Handguard

    https://truenortharms.com/ar15_defau...y-install.html





    Super Keymod Handguard (Easy-Install)

    https://truenortharms.com/ar15_defau...y-install.html

    True North Arms Corp.
    Website truenortharms.com
    Email info@truenortharms.com
    Instagram truenortharms

  2. #2
    CGN Regular diablo_man's Avatar
    Join Date
    Nov 2011
    Location
    BC
    Posts
    207
    ...
    Last edited by diablo_man; 08-14-2019 at 06:43 PM.

  3. #3
    CGN Regular neoconfection's Avatar
    Join Date
    Mar 2013
    Location
    Ottawa, ON
    Posts
    392
    Quote Originally Posted by diablo_man View Post
    Any chance of these coming in a dark Green(foliage or OD green)?
    I know it's not quite the question you asked, but these rails are very rattle-can friendly

  4. #4
    CGN Regular Baitcaster's Avatar
    Join Date
    Dec 2016
    Location
    Toronto
    Posts
    119
    I really, really like the stock handguard. I just wish it was a couple of inches longer. Any chance Wolverine/Kodiak will offer a longer version of the stock handguard as an aftermarket item in the future?

  5. #5
    Member Haywire1's Avatar
    Join Date
    Feb 2012
    Location
    originally Sk now Edmonton. Go Riders
    Posts
    88
    Quote Originally Posted by Baitcaster View Post
    I really, really like the stock handguard. I just wish it was a couple of inches longer. Any chance Wolverine/Kodiak will offer a longer version of the stock handguard as an aftermarket item in the future?
    Should probably ask that in Wolverines section....
    "A fear of weapons is a sign of retarded sexual and emotional maturity."
    - Sigmund Freud

  6. #6
    CGN Regular
    Join Date
    Jan 2010
    Posts
    131
    Has anyone actually fitted an aftermarket barrel nut? My Wk180c's barrel nut threads are completely out of spec and I'm too afraid of cross threading the receiver threads.

  7. #7
    Newbie AFC22's Avatar
    Join Date
    Feb 2017
    Location
    Petawawa
    Posts
    2
    Anyone successfully removed the factory hand guard?

  8. #8
    Member
    Join Date
    Dec 2018
    Location
    604
    Posts
    60
    Quote Originally Posted by AFC22 View Post
    Anyone successfully removed the factory hand guard?
    Someone posted in the wolverine vendor forum recently ..mangled bolts but he took it off

  9. #9
    CGN Ultra frequent flyer Paul_T's Avatar
    Join Date
    Sep 2016
    Location
    B.C. Interior
    Posts
    3,606
    Quote Originally Posted by AFC22 View Post
    Anyone successfully removed the factory hand guard?
    Yes, no problems. 3mm allen. Some got shipped with blue loctite on the screws (my early rifle did).

    Heat them up a bit with a heat gun or hair dryer if they won't move.
    Last edited by Paul_T; 01-18-2019 at 07:46 PM.
    "No matter where you go - there you are"

  10. #10
    CGN Regular
    Join Date
    Jan 2010
    Posts
    131
    Has anyone successfully change out the barrel nut?

Page 1 of 7 1234567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •