7.62 x 51mm Lake City Brass - Processed

[BlackSheepBrass]

RESTOCKED as of 15 March 2020

**7.62 Nato - Lake City 16 or FC 19*

• 250 pieces $90 plus shipping and taxes
• 500 pieces - $150 plus shipping and taxes
• 1,000 pieces - $260 plus shipping and taxes

Statistics

• Trim length Average: 2.000" +/- 0.003"
• Headspace Average (SAAMI): -0.003" +/- 0.002"
• Internal neck tension (after deburr and chamfer): 0.300"
• The end user should deburr and chamfer the brass while inspecting it prior to loading

****** UPDATE 13 Feb 2019 ******
Processed 308 / 7.62 Nato should be available by the end of the month. I just got a notification that my back ordered parts are on their way to me.

First batch will be Lake City '16 and following that PMC. It is all subject to what the ranges are using at any given time.



******************************
I am looking at adding 7.62 x 51mm Nato brass processed. I probably have 50,000 pieces of Lake City '16 sitting around

It would not be Camdex processed. So no ringer check or crack check like the .223 / 5.56mm

Hence it would be

Deprimed
Swaged primer pockets
Resized
Trimmed to length

[Janeau]

Do you have an idea of what the pricing will look like ?
Thanks.

[BlackSheepBrass]

I have to run and see what the throughput and consumption of parts is like before I can provide an accurate pricing. It will be attractive enough to justify loading your own ammunition.

[KePet]

You know I'll be in for some. Thanks for continuing to try and make this available.

[1-trident-1]

would this be Lake City Match brass?

[BlackSheepBrass]

Just regular Lake City brass, in all the brass I have actually handled I have never seen any Lake City Match.

[purplezuk]

Would you be interested in selling it unprocessed?
I find lc to be very consistent for reloading, but I have the automated press in my basement to process already.
Thanks
Justin

[BlackSheepBrass]

If you are looking for the unprocessed variant please see attached link

Lake City 7.62 x 51mm Brass

[BlackSheepBrass]

Processed 308 / 7.62 Nato should be available by the end of the month. I just got a notification that my back ordered parts are on their way to me.

First batch will be Lake City '16 and following that PMC. It is all subject to what the ranges are using at any given time.

[kinik]

keep us posted. LC processed interests me.

Kinik