Warranty and Customer Concerns:
The first shipment of FX-9 rifles are in the Canadian market and below is the procedure.
1. Customer MUST fill out the CANADA warranty request form on the Freedom Ordnance website. https://freedomordnance.com/canada-w...epair-request/
2. Customer will be contacted by Freedom Ordnance within two business days to address the issue.
3. If Freedom not able to correct via email then Freedom will issue a return label to have rifle returned to Wolverine for repair.
4. Wolverine will repair, test and return to customer.
All firearm issues require the above documents to be completed so ALL issues can be tracked, including any feeding and operation issues. If you do not report them, we cannot address them.
Ammunition Options and Lubrication:
We have found that many FX-9’s are being under lubricated. These are new firearms and require generous lubrication prior to being used on the range. Use a good quality gun oil such as Bore Tech, G-96.
We recommend round nose FMJ 115 gr to get started. We would recommend starting with Aguila 115 gr, Magtech 115 gr, Tulammo 115 gr, PMC 115gr round nose projectiles.
We don't recommend aluminum case ammunition , truncated and certain hollow point designs don't feed very well.
Thin plated bullets and or cast projectiles with only a thin coating of wax or copper will be less reliable then a true jacketed projectile.
As always:
You can E-mail us at: sales@wolverinesupplies.com
You can Call us at: 204-748-2454
You can send at letter to: Box 729 , #1 River Valley Road, Virden, MB, R0M 2C0 , Canada
You can send a messenger to : Lattitude - 49.89617 | Longitude - 100.85384 NE ¼ 5-11-25
Link to the Website --> https://www.wolverinesupplies.com/Pr...-DEPOSIT-ONLY-