CanadianGunNutz.com logo, Firearms News and Classifieds in Canada

Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Fightlite MCR-100 belt fed AR15

  1. #11
    CGN frequent flyer Dr. Hunter's Avatar
    Join Date
    Dec 2012
    Location
    Edmonton
    Posts
    1,297
    Quote Originally Posted by Ninja_En_Short View Post
    Never had a belt fed in Canada. Is there anything mechanically preventing from linking more than 5 rounds ? Are they not regular M27 links ?
    The only thing physically preventing you from linking more than 5 rounds is the threat of Trudeau haunting you... Think of the children how many will die of you're not paying attention and accidently link 6.

  2. #12
    GunNutz Ced1942's Avatar
    Join Date
    Feb 2018
    Location
    Croissant speaking province
    Posts
    407
    Im not familiar with belt fed weapons but could you leave an empty link every 5 rounds in a full belt? That way you fire 5 round, it stop, you rack the bolt to chamber the next link and here you go.
    Quote Originally Posted by kmw1970
    My grandfather never worried about the dents in his mil-surps, he would say "that dent may be all that's left of some fellow's life."
    WTB:Austro-Hungarian small arms

  3. #13
    CGN frequent flyer Dodo Dug's Avatar
    Join Date
    May 2011
    Location
    Ontario
    Posts
    1,081
    Quote Originally Posted by Dr. Hunter View Post
    I seem to be doing it wrong. I used a Prs stock and an eotech but lots of the one I've seen here go with the elcan and adjustable ar 15 Buttstock.

    Sure doesn't look like you're doing anything wrong!
    -- SI VIS PACEM PARA BELLUM --

  4. #14
    GunNutz Bartok5's Avatar
    Join Date
    Mar 2004
    Location
    Edmonton, Alberta
    Posts
    2,187
    Your MCR seems kinda "conflicted". On the one hand, the heavy and bulky PRS stock suggests a DMR or GPMG type of role. On the other hand, your choice of optic screams "CQB" engagement ranges.

    I agree that the Feed Cover fitment is somewhat sloppy, not lending itself to the use of high-magnification optics. My use of the Elcan OS4 thus far provides a decent compromise combining enhanced target detection and precise aiming, with a wide field of view and decent peripheral awarness. One can still apply the "Bindon" CQB aiming concept for close-range engagements using the illumination in a pinch.

    Thee is nothing inherently wrong with your set-up and you can certainly do whatever you like with your firearm, variety being the spice of life, etc. I just happen to have mine set up as a lightweight and compact "assault MG", notwithstanding its semi-only function and absurd 5-round belt limit. IMO the system's light weight (approx 10 lbs with Elcan) and enhanced accuracy in comparison to every other LMG currently on the market lend themselves to such a role.
    Mark C

  5. #15
    CGN Ultra frequent flyer Armedsask's Avatar
    Join Date
    Mar 2004
    Location
    Saskatchewan
    Posts
    8,530
    Quote Originally Posted by Ced1942 View Post
    Im not familiar with belt fed weapons but could you leave an empty link every 5 rounds in a full belt? That way you fire 5 round, it stop, you rack the bolt to chamber the next link and here you go.
    No.
    The above post is the intellectual property of the person commenting under the pseudonym "Armedsask". These posts are for informational and entertainment use. Copying or quoting in whole, or in part, is given free license for use by any member of this board for use on this board. Any use, in whole or in part, for reference outside this forum requires the express written consent of its author.

  6. #16
    CGN Regular SuperDave's Avatar
    Join Date
    Jun 2004
    Location
    Shannon, Quebec
    Posts
    210
    Quote Originally Posted by Ced1942 View Post
    Im not familiar with belt fed weapons but could you leave an empty link every 5 rounds in a full belt? That way you fire 5 round, it stop, you rack the bolt to chamber the next link and here you go.
    It wouldn't work with disintegrating links. The cartridge is what holds the two adjacent disintegrating links together. If you take an 11 round belt and remove the cartridge in the middle you will end up with two separate 5 round belts (and a loose cartridge).

    As for "old" design cloth belts, most feed mechanisms would not be able to keep "pulling" on the belt if there is a round missing in the belt. There are probably exceptions but the vast majority of the feed mechanism pull the belt in by "gripping" on the rounds, not the belt itself.
    "Fooling around with alternating current is just a waste of time. Nobody will use it, ever." - Thomas Edison, 1889

  7. #17
    CGN Regular SuperDave's Avatar
    Join Date
    Jun 2004
    Location
    Shannon, Quebec
    Posts
    210
    Quote Originally Posted by SuperDave View Post
    It wouldn't work with disintegrating links. The cartridge is what holds the two adjacent disintegrating links together. If you take an 11 round belt and remove the cartridge in the middle you will end up with two separate 5 round belts (and a loose cartridge).

    As for "old" design cloth belts, most feed mechanisms would not be able to keep "pulling" on the belt if there is a round missing in the belt. There are probably exceptions but the vast majority of the feed mechanism pull the belt in by "gripping" on the rounds, not the belt itself.
    And it goes without saying that old cloth belts wouldn't work in that gun.
    "Fooling around with alternating current is just a waste of time. Nobody will use it, ever." - Thomas Edison, 1889

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •