My 50 beo E-Lander works fine
So back to the modification of the cmmg kit to fit the sporter. I took some pics to get ideas. My upper is still in Canada post land. But looks like the lower main support bar if shortened a little bit will work as there’s lots of room when the bcg moves backward to re chamber a new round.
https://i.postimg.cc/wM4X1ZwT/4-F6-B...50-BAC5191.jpg
https://i.postimg.cc/RVq1kC03/6-BB89...-FDFE62243.jpg
https://i.postimg.cc/ZYwFsvJt/A25-AF...3-D16-B6-C.jpg
https://i.postimg.cc/PJ5brTzR/A5-FEE...-C5-D3-E20.jpg
"Victory favours the prepared"
Looks like you could shorten and re weld the lower main support....Depends on if the spring will coil bind on open bolt......looks like you might have to shorten the spring... and spring guide and tube as much as the support bar.....
"I dunno, .22's are kinda cool....."
Either that or cut off the tab and on the back and tack on peice of angle to move where it’s attaches to spring forward . Having just the circle in back should let it go into buffer tube .
Looking at it now i see what you mean . Either way it’s done the spring and guid rod will need to be shortened. I’m glad this thread exists. Looks like the 2a kit will be the one I choose . Then into the chop saw and hack .175 off the back. Anyone know where to get the 2a kit already tried the google