Ballistic Plates Incoming

[jhnvan]

None of our ceramic or PE plates have any noticeable external coating other than a thin wrap of fabric and some cushioning in the corners. If you where in the area I would invite you to come by and try some of our plates in your carrier. If space is the issue I would definitely suggest the level III aluminum or PE as that would be the slimmest other than the steel. But based on what you are describing I would suggest trying to put the hard plates and soft plates in when the vest is off and then try and adjust the size of the vest to you with the plates inside.

How thick is the Aluminum plate? And it looks like you guys are all sold out of the pre-orders...?

[AITacticalSolutions]

How thick is the Aluminum plate? And it looks like you guys are all sold out of the pre-orders...?

The aluminum level IV is around 22mm thick, and the Level III is around 18mm thick. Our orders are closed until this first shipment arrives and we ship out to those who have already ordered. Once that’s done we will open up sales again with us actually holding inventory at our warehouse.

[Ed The 3rd]

Just a question to you guys. We are currently working on soft armor and we are curious if you would be interested in...

Indeeeeeed

[jhnvan]

The aluminum level IV is around 22mm thick, and the Level III is around 18mm thick. Our orders are closed until this first shipment arrives and we ship out to those who have already ordered. Once that’s done we will open up sales again with us actually holding inventory at our warehouse.

Level 3 sounds like a good option then.

When do you guys expect to have everything completed and stock on these plates? Thanks!

[AITacticalSolutions]

Level 3 sounds like a good option then.

When do you guys expect to have everything completed and stock on these plates? Thanks!

We should be ready to go with inventory available in about two weeks. We will post here and on our social media once we have the plates in stock.

[a0jc]

We should be ready to go with inventory available in about two weeks. We will post here and on our social media once we have the plates in stock.

When do you think can announce the low profile soft armour vest/shirt?

[AITacticalSolutions]

When do you think can announce the low profile soft armour vest/shirt?

Probably in the beginning of autumn we should have our full announcement up, with photos and detailed information.

[AITacticalSolutions]

Just a quick update the shipment is in the port of Toronto and we are currently clearing it through customs.
This is how we feel with the plates this close to coming in.

[bfiles]

Any word on the polymer T81 furniture ??

[AITacticalSolutions]

Any word on the polymer T81 furniture ??

We are currently working on bringing prototype production in house. We are currently in the process of building our production shop and we are trying our best to push the T81 furniture forward. I apologize for the delay but we have had to move this project to the back burner while we have been bringing in the plates and russian equipment.