LAR-15 223-556 Stainless 10/30 Round pistol Magazine in Canada 23.94USD

IRUNGUNS

IRUNGUNS

CGN Ultra frequent flyer
Business Member
Rating - 100%
187   0   0
051818051818.jpg

Please click picture for link to site
 

Attachments

  • 051818051818.jpg
    051818051818.jpg
    32.7 KB · Views: 7,113
Last edited:
VancouverS4 said:
any news if these pistol mags will be made for 7.62x39 or 308 pistols?
Click to expand...

They had a long thread on the x39, but I can't find it now. The short of it (from what I remember) was there are no AK-pistols commonly available up here, so the pistol mags are a no go.
 
A little tight on the 10th (the 10 round lengths load easier on a closed bolt with 10 in it) on a closed bolt, 1 mag of mine needed to be pinched slightly in a vice to drop free perfectly, but they are very good magazines.
 
dacron said:
They had a long thread on the x39, but I can't find it now. The short of it (from what I remember) was there are no AK-pistols commonly available up here, so the pistol mags are a no go.
Click to expand...

XCR Pistol mags are STANAG and compatible with 7.62 X 39 AR15s..... so, they could make those.....and I would buy a few.....dozens
 
db17 said:
anyone using these? any feed issues?
Click to expand...

I have 30 of them. Zero fit, feed, or drop-free issues in my ARs, my WK180, my MDI SLR, or my Tavor. Solid mag. Well-made and uniform quality (not all followers are the same colour - no biggie). Accidentally slammed my trunk lid on an empty one and it held its shape/function.
 
Has anyone bought these recently and had like a round plug or pin at the bottom of their mag? Is it safe to remove it since the mag is crimped if removed will it increase capacity to more than 10?
 
Jest4phun said:
Has anyone bought these recently and had like a round plug or pin at the bottom of their mag? Is it safe to remove it since the mag is crimped if removed will it increase capacity to more than 10?
Click to expand...


I just bought 7. My mags have that plug... I'm not sure what exactly it's for either, but mine were greased up.

Also, I Run Guns ships fast (thanks)! I haven't had a chance to take the mags to the range yet, but I have loaded them all up and they all hold 10 rounds as expected.
 
richmond_driver said:
I just bought 7. My mags have that plug... I'm not sure what exactly it's for either, but mine were greased up.

Also, I Run Guns ships fast (thanks)! I haven't had a chance to take the mags to the range yet, but I have loaded them all up and they all hold 10 rounds as expected.
Click to expand...
I bought 10 of these mags I’ll say it outright it’s ill advised don’t take out the plug rivet at the bottom DO NOT take it out these do not function as advertised. I though the crimps would work as advertised as to permanently limit it to 10rds, the pin at the bottom is now what limits it to 10rds permanently. So I don’t think you should take it apart to clean it.
 
Last edited:
Jest4phun said:
I bought 10 of these mags I’ll say it outright it’s ill advised don’t take out the plug rivet at the bottom DO NOT take it out these do not function as advertised. I though the crimps would work as advertised as to permanently limit it to 10rds, the pin at the bottom is now what limits it to 10rds permanently. So I don’t think you should take it apart to clean it.
Click to expand...

Wait, so the crimps are meaningless? If you pull the plug out it holds 30 rounds and if you put the plug back in it goes back to holding 10 rounds?
 
richmond_driver said:
Wait, so the crimps are meaningless? If you pull the plug out it holds 30 rounds and if you put the plug back in it goes back to holding 10 rounds?
Click to expand...
Crimps aren’t meaningless it stops it but not at its quoted 10rds the plug actually holds in a floor plate limiter to permanently get it to 10rds. Hypothetically if said plug was gone nothing stops you from removing said limiter in and out whenever you wanted and finding out how many you can jam in without it. Since said follower may go down lower than said 10rds with crimp. So your choice is now don’t clean it take it apart ever or have a mag you might be able to adjust round count whenever you wanted. Personally first time I ever gotten the 10/30 body’s and the prospect of the advertised take apart to clean no longer applying.......
 
Last edited:
Jest4phun said:
Crimps aren’t meaningless it stops it but not at its quoted 10rds the plug actually holds in a floor plate limiter to permanently get it to 10rds. Hypothetically if said plug was gone nothing stops you from removing said limiter in and out whenever you wanted and finding out how many you can jam in without it. Since said follower may go down lower than said 10rds with crimp. So your choice is now don’t clean it take it apart ever or have a mag you might be able to adjust round count whenever you wanted. Personally first time I ever gotten the 10/30 body’s and the prospect of the advertised take apart to clean no longer applying.......
Click to expand...

Personally, I can live without cleaning the magazine. I just don't want the RCMP to kick down my door and shoot my non-existent dog because removing the butt plug from the magazine to clean them made them temporarily illegal.
 
I’m not happy with em I bought them in mind being able to clean them and take em apart since I get them dirty but finding out if I do I’ll be a criminal isn’t what I signed up for when I sought out these mags. Sucks I had to buy 10 to find out this way
 
You must log in or register to reply here.
Back
Top Bottom