any news if these pistol mags will be made for 7.62x39 or 308 pistols?
anyone using these? any feed issues?
They had a long thread on the x39, but I can't find it now. The short of it (from what I remember) was there are no AK-pistols commonly available up here, so the pistol mags are a no go.
XCR Pistol mags are STANAG and compatible with 7.62 X 39 AR15s..... so, they could make those.....and I would buy a few.....dozens
anyone using these? any feed issues?
Has anyone bought these recently and had like a round plug or pin at the bottom of their mag? Is it safe to remove it since the mag is crimped if removed will it increase capacity to more than 10?
I bought 10 of these mags I’ll say it outright it’s ill advised don’t take out the plug rivet at the bottom DO NOT take it out these do not function as advertised. I though the crimps would work as advertised as to permanently limit it to 10rds, the pin at the bottom is now what limits it to 10rds permanently. So I don’t think you should take it apart to clean it.I just bought 7. My mags have that plug... I'm not sure what exactly it's for either, but mine were greased up.
Also, I Run Guns ships fast (thanks)! I haven't had a chance to take the mags to the range yet, but I have loaded them all up and they all hold 10 rounds as expected.
I bought 10 of these mags I’ll say it outright it’s ill advised don’t take out the plug rivet at the bottom DO NOT take it out these do not function as advertised. I though the crimps would work as advertised as to permanently limit it to 10rds, the pin at the bottom is now what limits it to 10rds permanently. So I don’t think you should take it apart to clean it.
Crimps aren’t meaningless it stops it but not at its quoted 10rds the plug actually holds in a floor plate limiter to permanently get it to 10rds. Hypothetically if said plug was gone nothing stops you from removing said limiter in and out whenever you wanted and finding out how many you can jam in without it. Since said follower may go down lower than said 10rds with crimp. So your choice is now don’t clean it take it apart ever or have a mag you might be able to adjust round count whenever you wanted. Personally first time I ever gotten the 10/30 body’s and the prospect of the advertised take apart to clean no longer applying.......Wait, so the crimps are meaningless? If you pull the plug out it holds 30 rounds and if you put the plug back in it goes back to holding 10 rounds?
Crimps aren’t meaningless it stops it but not at its quoted 10rds the plug actually holds in a floor plate limiter to permanently get it to 10rds. Hypothetically if said plug was gone nothing stops you from removing said limiter in and out whenever you wanted and finding out how many you can jam in without it. Since said follower may go down lower than said 10rds with crimp. So your choice is now don’t clean it take it apart ever or have a mag you might be able to adjust round count whenever you wanted. Personally first time I ever gotten the 10/30 body’s and the prospect of the advertised take apart to clean no longer applying.......