PSA Freedom 16 424.00USD In Canada

[IRUNGUNS]

Please click picture for link to stock

Barrel Length: 16"
Barrel Material: 18 Nitride
Barrel Profile: A2-style
Chamber: 5.56 NATO
Twist Rate: 1 in 7”
Extension: M4
Gas System: Carbine
Gas Block Type: F-marked FSB
Upper Receiver: Forged 7075 T6 Aluminum
Receiver Style: M4 Flat top with feedramps
Receiver Finish: Hardcoat Anodized
Forward Assist: Yes
Dust Cover: Yes
Hand Guard Type: Polymer
Hand Guard Style: Classic Tapered
Hand Guard Length: Midlength
Bolt Steel Carpenter 158 Mag Phosphate coated
Bolt Carrier: Steel 8620 Chrome lined
Staked Gas Key: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized
Fire Control Group: Single-Stage Mil-Spec style
Buffer Tube: 7075 T6 Aluminum
Stock Adjustment: 6-position
Stock: PSA M4-Style
Length: 33
Weight: 6.5 lbs.

[JBD]

The triggers on these are milspec. They work but are heavy and rough. I did a small trigger job which much improved it and was getting 10 rounds into a 4 inch group at two hundred yards. Using campro 55 grain bullets which are cheap and a bit light for the 1-7 barrel. I was pleasantly surprised by the accuracy of my psa.

[PaveHammer]

Are these guns M4's (as pictured), or Midlength-gas 16" barrels (as received from the previous order)?

Bradley

[IRUNGUNS]

Yes, these are confirmed Carbine models, the information has been updated on the site.


The IRUNGUNS Team

Are these guns M4's (as pictured), or Midlength-gas 16" barrels (as received from the previous order)?

Bradley

[tobin]

The triggers on these are milspec. They work but are heavy and rough. I did a small trigger job which much improved it and was getting 10 rounds into a 4 inch group at two hundred yards. Using campro 55 grain bullets which are cheap and a bit light for the 1-7 barrel. I was pleasantly surprised by the accuracy of my psa.

Mine was also quite accurate with 55 gr. Federal FMJ , 1.25-2" at 100 yards off the bench with 1-4 scope. My trigger was OK, better than the trigger on my Ruger SR 556 or my DPMS Tac 2

[Kranger_Rudy]

I recently purchased one of these from IRG and am really happy with it for the price. I only have about 70 rounds through it but I've experienced zero issues so far.

[IRUNGUNS]

Back in Canadian stock...