Are you able to pin A2 gas blocks to barrels by chance?
Thanks in advance
Are you able to pin A2 gas blocks to barrels by chance?
Thanks in advance
True North Arms Corp.
Website truenortharms.com
Email info@truenortharms.com
Instagram truenortharms
True North Arms Corp.
Website truenortharms.com
Email info@truenortharms.com
Instagram truenortharms
“The lion cannot protect himself from traps, and the fox cannot defend himself from wolves. One must therefore be a fox to recognize traps, and a lion to frighten wolves.”
May have missed this but if I purchased a barrel could you set it up for a traditional A2 FSB? Those 2 little grooves for the Taper pins?
Thanks in advance.
A.W.
EDIT: just read the top post of this page, will stay tuned.
Last edited by A.Waterman; 09-09-2019 at 06:39 PM.
True North Arms Corp.
Website truenortharms.com
Email info@truenortharms.com
Instagram truenortharms
this could be promising.
would you be able to source a complete upper for a dpms 308. looking for 12.5 inch if there are any you can acquire, that would be nice.
"an armed society, is a polite society"
Look up aesthetic anodizing on Facebook. He does all sorts of will finishing.
Proud Mapleseed Member
Mapleseed Rifleman x2
Can you reprofill barrels my AR barrel it is to thick in some places ?