After a long and arduous year with the FX9s we are finally seeing the day that they are no longer backordered!!!!! We have enough units here to clean up all outstanding backorders and have some on the shelf!!

So what this means for you, if you have a backorder with us and you haven't heard from us as of yet, we are burning through the list now, but feel free to give us a call and we can finish her off for ya If you dont have a backorder for one of these things As always:

You can E-mail us at: sales@wolverinesupplies.com

You can Call us at: 204-748-2454

You can send at letter to: Box 729 , #1 River Valley Road, Virden, MB, R0M 2C0 , Canada

You can send a messenger to : Lattitude#49.89617 | Longitude -100.85384 NE ¼ 5-11-25


Link to the Website --> https://www.wolverinesupplies.com/Pr...e#?sortValue=0



The FX-9 carbine (Freedom Xtreme-9mm Carbine) has a familiar set of operating controls for the avid AR-15 user, it accepts AR-15 stocks and buffer tube assemblies,as well as most free float AR-15 rail assemblies.

The FX-9 comes standard with a 10 rd double stack Glock® style 9mm magazine. When we designed the FX-9 our goals were Reliability , Affordability, and familiar controls for the user.

The FX-9 is machined From Billet material, Anodized type III aluminum components and Full hard nitride Steel components including the barrel,bolt,ejector,last round hold open,feed ramp and extractor for extended wear properties and corrosion resistance.

The upper and lower receiver are more than 1.00″ shorter than a standard AR-15 upper and lower receiver making it more compact and lighter than a standard mil-spec AR-15 design

We do not recommend using aftermarket lighter weight triggers, if you wish to try an aftermarket trigger group we recommend keeping your factory supplied trigger group nearby for re-installation as it has more disconnector engagement built into it than a normal mil spec trigger group or after market trigger group..

Specifications
Manufacturer: Freedom Ordnance

Model: FX-9

Calibre: 9mm (9x19)

Action: Semi-Auto

Safety Type: Two-Position

Trigger Type: Single Stage

Barrel Specifications: 18.6" Freedom Ordnance barrel Threaded for 1/2 x 28 muzzle devices

Gas System: Blow back

Muzzle Device: A2 Flash hider

Upper Receiver: Type 3 Anodized Billet 7075

Lower Receiver: Type 3 Anodized Billet 7075

Furniture: 6 possition Collapsing S3 Stock and A2 pistol Grip

Handguard: 15" Free Float M-lock

Sights: None

Finish: Black Anodized

Capacity: 10rd Pistol Magzines (Glock)

Weight: 2.8 KG

Overall Length: 32 1/4"- 35 1/2"

Classification: Non-Restricted

Accessories Included: 1x Magazine total and Manual

Features Include:
LIMITED LIFE TIME WARRANTY

-Chambered in 9×19
-15″ Free float M Lock Rail
-6 Position collapsing S3 stock
-AR-15 Configured Rear charging handle
-AR-15 Configured safety selector
-AR-15 Configured last round bolt hold open
-AR-15 Configured magazine Release
-AR-15 Compatible pistol grips (Without the Rear Tang)
-compatible with 9mm approved 1/2″x 28 T.P.I. muzzle devices and suppressors
-compatible with KNS precision® AR-15 trigger pins.


The FX-9 upholds Xtreme reliability with a wide range of ammo including many hollow point designs for self defense, full metal jacket and copper plated bullets.

We do not recommend the use of non jacketed/plated ammunition as unprotected lead can cause fouling and buildups that plated and jacketed bullets do not.



Do Not use aluminum case ammunition in your FX-9 !!