logo, Firearms News and Classifieds in Canada

Results 1 to 1 of 1

Thread: Lapua Headstamp 308 Winchester

  1. #1
    Business Member BlackSheepBrass's Avatar
    Join Date
    Jan 2016
    Cobourg, Ontario

    Lapua Headstamp 308 Winchester

    I had some brass come in that had been sitting in a law enforcement storage locker for 15 years the other day. I had some time to go through it and break it apart... all 6,000 lbs of it. I came up with a fair amount of Lapua .308 and Lapua .338 Magnum. There is some staining that will require wet cleaning on some of the brass. Most of it has the factory annealing marks on it (95% or better) doesn't look like it has been used beyond the once. Some of it does appear to have been polished at one point in time (small amount of the .308)

    .308 Lapua brass - 1,000 left from the 3,000 I had available in multiples of 250 for $175 ($0.70 per piece)
    Name:  71284116_936210730073435_4875940010232119296_n.jpg
Views: 173
Size:  140.3 KB

    Terms of conducting business with Black Sheep Brass - This is here to ensure the transaction goes smooth and everyone is satisfied.

    • I do not sell fractional amounts, if you want a smaller quantity than listed, I will refer you to a retailer that carries my product
    • I aim to be a really reasonable person. I try to treat everyone I deal with in a professional and polite manner.
    • Please just don't waste my time, and I won't waste yours
    • If you blatantly ignore the below policies, I will not do business with you.
    • No pickups at or tours of the shop are permitted.


    • Cash
    • EMT
    • Money order or bank draft
    • Canada Post COD (+ $7.00 fee)
    • Credit Card
      • As a small business I incur a fairly large expense to process credit card payment, hence;
        • $250 total including taxes or less, there will be no service charge
        • $500 total including taxes or less will incur a 1.5% service charge
        • Greater than $500 will incur a 3% service charge.

    Pricing, Invoicing and Sales Tax:

    • I don't accept offers
    • I try to set my prices according to my costs
    • I have to charge HST or GST. Don't ask me not to charge it.
    • When I send you the invoice please ensure the shipping and billing address is correct. I ship based on the address on the invoice.


    • I do not accept trades on brass.
    • I buy my brass by the truckload from commercial ranges, by the pound.
    • I do not purchase brass from consumers

    Shipping Options:

    • Please send me your postal code and I will provide you with a quote. All shipping will be quoted with proper insurance. I charge what I pay for shipping & materials.
    • No pickups at the shop. This is an insurance issue as I cannot have people without proper PPE and safety training in the shop. (Again I am not a retailer, I am a wholesaler/manufacturer)

    Military Discount:

    • Military Veterans, and active service members: Reg F, P Res A/B/C, are entitled to a discount when purchasing directly from me
    • You will have to provide proof of service. NDI 10, 20, 75 or I will ask you some simple questions.
    • I have had some imposters before, just so you know it is actually a criminal offence in Canada to impersonate. I will be making a phone call to the RCMP to report any suspected imposters.

    Returns & Exchange

    • If you want to return or exchange something, you have 30 days to get it back to me at your expense from the date you received.
    • You need a reasonable (to me) reason to return or exchange something. IE: non-cosmetic defect rate above 2% extra issued, I sent you the wrong calibre
    • If the product is marked "mixed headstamp" and you want to return it because you do not like the makeup of the headstamps, I will not accept a return on it. If you ask, I will give you an approximate makeup prior to shipping

    Technical Support

    • I am willing to provide you with some over the phone technical support on how to load my processed brass efficiently.
    • I do not recommend calibrating your machines as then your machine setup will not perform well on anything but processed brass.
    • I do not recommend learning how to reload on processed brass you will not know how to reload properly if you take this route.
    • Anything outside this will that consumes my time unnecessarily will be billed at my shop rate of $180 per hour plus taxes.

    Tire Kickers

    • I will go out of my way to be of assistance to you, however, if you are not respectful of my time I will not do business with you.
    • If you offer $### shipped, that is a waste of time. You will get the standard response of me declining it.
    • Requesting multiple quotes for slightly different amounts of the same things is something that consumes a large amount of time, so here is a quick cheat sheet:
      • The lower the quantity of an item you buy, the more per unit you will pay.
      • Unless I have a fractional amount listed I will not sell smaller quantities
      • Shipping costs don't change in direct correlation with how much you buy
        • If you ship 100 cases it is probably not much cheaper than shipping 1,000.

    Communications Policy:

    • I require an email address minimum. The most efficient way for me to communicate with you is via email or phone.
    • If you endlessly CGN message me but will not communicate with me via email or phone, it tells me you are not serious.
    • Once our transaction is complete, you won't receive unsolicited communications from me. I won't sell or rent your information. I can even delete your information if you so desire.
      • The only exception to this is if you buy something particular or ask for something and it shows up I will send you an email offering it up.

    Liability Waiver:

    • Reloading is done at your own risk. We are not liable for any possible personal injury, property damage or damage to firearms resulting from the unsafe handling of firearms or improper reloading techniques.
    • The end user is responsible for the final inspection prior to loading the brass and discharging the assembled ammunition. This includes ensuring that brass has the correct headstamp for the ammunition being loaded.
    • You may find the occasional case with a crack, dented, minor staining, damaged mouth, off head-stamp or defect incurred while processing.
    • You get an extra 2% to account for any of the above
    Attached Images Attached Images  
    Last edited by BlackSheepBrass; 09-19-2019 at 03:01 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts