Spectre Ballistics Light Practical Carbine - NR Receiver Set

[Marksmen1987]

Will this accept AR drop in triggers?

[SpectreBallistics]

Will this accept AR drop in triggers?

Yep.

[Devin_07]

What’s the latest progress? Do we have a release date?

[Marksmen1987]

Yep.

Thanks! Looking forward to this platform. Godspeed.

[MiniMe]

Is the ejection port large enough for the big bores like 458 and .50 beo?

[SpectreBallistics]

Is the ejection port large enough for the big bores like 458 and .50 beo?

We have not tested it with those calibers, but it should be large enough.

[AbHobbyist]

Well I hate to be bothersome but ................

Are we there yet??

If not how close are we??

Inquiring minds want to know!! (Grin)

Warmest regards

AbH

[SpectreBallistics]

Well I hate to be bothersome but ................

Are we there yet??

If not how close are we??

Inquiring minds want to know!! (Grin)

Warmest regards

AbH

We are waiting for the FRT and for warmer weather. We have been running hundreds of dummy rounds though the prototype and have a few small changes to make to the bolt body. We found that hammers with a notch may jam. We also found that smooth feeding requires good magazines and smooth feed ramps. E-lander and CPD mags are running great, some cheap USGI mags are terrible. A craptastic chinesium trigger might bind when extracting the spent case. NEA barrels are not so great for feeding, while a Maple Ridge barrel is nice. People will need to keep this in mind when building their guns. Use good components, not cheapo ones.

This week we are focusing on production fixturing for our new Glock Muzzle brakes. Our material for brakes is scheduled to arrive late this week so we want to make chips ASAP. Next week we plan on designing production fixtures for the C-71 rifle and hopefully start production in a week or two.

[Wester]

We are waiting for the FRT and for warmer weather. We have been running hundreds of dummy rounds though the prototype and have a few small changes to make to the bolt body. We found that hammers with a notch may jam. We also found that smooth feeding requires good magazines and smooth feed ramps. E-lander and CPD mags are running great, some cheap USGI mags are terrible. A craptastic chinesium trigger might bind when extracting the spent case. NEA barrels are not so great for feeding, while a Maple Ridge barrel is nice. People will need to keep this in mind when building their guns. Use good components, not cheapo ones.

This week we are focusing on production fixturing for our new Glock Muzzle brakes. Our material for brakes is scheduled to arrive late this week so we want to make chips ASAP. Next week we plan on designing production fixtures for the C-71 rifle and hopefully start production in a week or two.

How about Gen3 PMAG's?

[Geoff B]

We are waiting for the FRT and for warmer weather. We have been running hundreds of dummy rounds though the prototype and have a few small changes to make to the bolt body. We found that hammers with a notch may jam. We also found that smooth feeding requires good magazines and smooth feed ramps. E-lander and CPD mags are running great, some cheap USGI mags are terrible. A craptastic chinesium trigger might bind when extracting the spent case. NEA barrels are not so great for feeding, while a Maple Ridge barrel is nice. People will need to keep this in mind when building their guns. Use good components, not cheapo ones.

This week we are focusing on production fixturing for our new Glock Muzzle brakes. Our material for brakes is scheduled to arrive late this week so we want to make chips ASAP. Next week we plan on designing production fixtures for the C-71 rifle and hopefully start production in a week or two.

What is the problem with NEA barrels? I was considering both a 5.56 and 7.62 X 39 build.