Results 1 to 3 of 3

Thread: Commercial Case Sizing Machine and Dillon 1050 bulletfeeder

  1. #1
    Business Member Western Metal Inc's Avatar
    Join Date
    Jan 2014
    Location
    Calgary
    Posts
    4,793

    Commercial Case Sizing Machine and Dillon 1050 bulletfeeder

    Letting go of some of our equipment we no longer use.

    CASEPRO-100 with autodrive and multiple die sets:$2500
    https://www.westernmetal.ca/shooting...sizing-machine

    "This machine was designed with reliability in mind. We accomplished this with a simple process using a forming rail. The rail is mounted to the base casting with 2 precision shoulder bolts and a back up rail mounted to a slide. These components are made of tool steel harden to a Rockwell of 58-60. This makes it almost impossible to wear these components out! The slide sits on top of 2 floor fillers and is backed up by 3 precision rollers to guide the slide smoothly from front to back. The handle has a pistol grip for comfort while the cases are fed into a transfer bar that shuttles the case over the dies and drops them in between in just one stroke . When the handle is maneuvered forward the cases are rolled between the dies to reduce the bulge and re profile the extractor groove and rim while another case is loaded in to the transfer bar. The handle is returned and the process in repeated. Dies are easily changed with 2 Allen wrenches in less then 5 minutes. The transfer bar is equipped with 2 hole sizes to accommodate both large and small calibers, by sliding it out the back of the shuttle frame and turning it around you are ready to begin sizing again. The base casting is made of 6061 aluminum and precision machined for a total .002 thousands of an inch fit, while the dies are machined to .0005 thousands of an inch. This makes for a very accurate machine. Each unit is then hand fitted to assure proper function."
    Name:  RS pic1.jpg
Views: 680
Size:  97.1 KBName:  rs pic 2.jpg
Views: 677
Size:  71.3 KB


    GSI 9mm Bulletfeeder for Dillon 1050 with mark7 autodrive $750
    https://www.westernmetal.ca/shooting...m-bulletfeeder
    This setup can be easily adapted to other autodrive systems as well.
    Name:  gsibf.jpg
Views: 680
Size:  92.0 KB

  2. #2
    Business Member Western Metal Inc's Avatar
    Join Date
    Jan 2014
    Location
    Calgary
    Posts
    4,793
    great deal on these products for the high volume shooter.

    One of the nice things about the GSI bullet feeder is that it doesn't require its own station it runs on the seating station so you can use a powder check or some other die on the 4th station.

  3. #3
    Business Member Western Metal Inc's Avatar
    Join Date
    Jan 2014
    Location
    Calgary
    Posts
    4,793
    Still have these items available.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •