We have two coming in .45-70 and two in .35-55. Be here in about 5 days. (give or take)
$2199.00
These were booked just about exactly a rear ago at SHOT
http://www.winchesterguns.com/produc...igh-grade.html
We have two coming in .45-70 and two in .35-55. Be here in about 5 days. (give or take)
$2199.00
These were booked just about exactly a rear ago at SHOT
http://www.winchesterguns.com/produc...igh-grade.html
www.prophetriver.com
inquiries - 780-875-0575 / info@prophetriver.com
Prophet River Firearms
4206 66th Ave
Lloydminster, AB
T9V 3S9
RECEIVER – Steel; Color case hardened finish
BARREL – Gloss blued; 28” full octagon
ACTION – Single shot; Falling block lever action
STOCK – Grade III/IV walnut; Pachmayr Decelerator recoil pad
FEATURES – Drilled and tapped for scope mount; Sling swivel studs
www.prophetriver.com
inquiries - 780-875-0575 / info@prophetriver.com
Prophet River Firearms
4206 66th Ave
Lloydminster, AB
T9V 3S9
The pic shows a crescent style butt plate, but the description says decelerator - can you confirm which is correct?
www.prophetriver.com
inquiries - 780-875-0575 / info@prophetriver.com
Prophet River Firearms
4206 66th Ave
Lloydminster, AB
T9V 3S9
these are now here. will get them up asap
www.prophetriver.com
inquiries - 780-875-0575 / info@prophetriver.com
Prophet River Firearms
4206 66th Ave
Lloydminster, AB
T9V 3S9
We now have the ones that are left listed online. Scroll down as they are near the bottom:
https://store.prophetriver.com/categ...er/Model-1885/
www.prophetriver.com
inquiries - 780-875-0575 / info@prophetriver.com
Prophet River Firearms
4206 66th Ave
Lloydminster, AB
T9V 3S9
www.prophetriver.com
inquiries - 780-875-0575 / info@prophetriver.com
Prophet River Firearms
4206 66th Ave
Lloydminster, AB
T9V 3S9
How hard is that crescent butt plate on one's shoulder????
rifle is 9 lbs bare so that helps with recoil.
www.prophetriver.com
inquiries - 780-875-0575 / info@prophetriver.com
Prophet River Firearms
4206 66th Ave
Lloydminster, AB
T9V 3S9
I’ve had a few guns with the crescent butt and they are fine UNLESS you misalign them lol. I did that once while shooting awkwardly from a bench and basically put the bottom point of the crescent in the soft spot on my shoulder ... do not recommend lol. The good thing is that the design is made to make that kind of misalignment less likely lol.