Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Spuhr RD/RDF Series Red Dot and Red Dot Flip Mounts

  1. #1
    Industry Member North_Sylva's Avatar
    Join Date
    Apr 2011
    Posts
    7,163

    Exclamation Spuhr RD/RDF Series Red Dot and Red Dot Flip Mounts

    Spuhr i Dalby AB introduces the RD™/RDF™ Series of red dot flip mounts.

    The RD™ and RDF™ series is a prime example of Swedish innovation and quality, and was a customer-prompted project, where a European military unit requested a mounting solution for the Aimpoint® Micro™ T-2 and the Aimpoint® 3XMag-1™ – but with a weight constraint not previously achieved by any manufacturer. We [Spuhr®] rose to the challenge and won the contract.

    The RDF™ series of flip mounts features a lightweight mount with a two-position removable magnifier yoke. The yoke is locked into the mount but can be removed completely with a simple push of a button. This patented solution provides a minimum of weight – just a mere 189 grams/6.7 oz for the mount with the magnifier yoke.

    The RDF™ series also allow an optional Picatinny rail (SKU A-0229) to be attached to the front of the mount, for the attachment of an illuminator, as well as an optional rear iron sight.

    The first model in the RDF™ series is the RDF-20225K, which has an optical height over rail of 57 mm/2.25” (as indicated by the model number) and a weight of 189 grams/6.7 oz. The RDF-20225K will be followed by the RDF-20291K, which will have a height of 74 mm/2.91”.
    In addition to the RDF™ flip mount series, Spuhr® is also launching the RD™ series of lightweight red dot mounts without the magnifier yoke. Available heights are 39 mm/1.53”, 42 mm/1.65”, 49 mm/1.93”, 57 mm/2.25”, and 74 mm/2.91”. The 57 mm and 74 mm height RD mounts are also compatible with the optional Picatinny illuminator rail.

    As always, quality has been a priority, where the mount does not feature any sharp edges while featuring the same high quality black anodizing known from all Spuhr® products.

    Visit booth 73005 at SHOT Show 2024 to see it live!

    Last edited by North_Sylva; 01-19-2024 at 01:09 PM.

  2. #2
    Industry Member North_Sylva's Avatar
    Join Date
    Apr 2011
    Posts
    7,163
    SPUHR® RD™/RDF™ SERIES

    Löddeköpinge, Sweden (January 19, 2024) – Spuhr i Dalby AB (Spuhr®) is introducing the RD™/RDF™ Series of red dot mounts at the 2024 SHOT Show in Las Vegas.

    Mr. Ulf Nilsson, CEO, says, “The RD and RDF series was a customer-prompted project, where a European military unit requested a mounting solution for the Aimpoint® Micro™ T-2 and the Aimpoint® 3XMag-1™ – but with a weight constraint not previously achieved by any manufacturer. We [Spuhr®] rose to the challenge and won the contract.”

    The RDF series features a lightweight mount with a two-position removable magnifier yoke. The yoke is locked into the mount but can be removed completely with a simple push of a button. This patented solution provides a minimum of weight – just a mere 189 grams/6.7 oz for the mount with the magnifier yoke. The RDF series also allow an optional Picatinny rail (SKU A-0229) to be attached to the front of the mount, for
    the attachment of an illuminator, as well as an optional rear iron sight.

    The first model in the RDF series is the RDF-20225K, which has an optical height over rail of 57 mm/2.25” (as indicated by the model number). The RDF-20225K will be followed by the RDF-20291K, which will have a height of 74 mm/2.91”.

    In addition to the RDF series, Spuhr® is also launching the RD series of lightweight red dot mounts without the magnifier yoke. Available heights are 39 mm/1.53”, 42 mm/1.65”, 49 mm/1.93”, 57 mm/2.25”, and 74 mm/2.91”. The 57 mm and 74 mm height RD mounts are also compatible with the optional Picatinny illuminator rail.

    As always, quality has been a priority, where the mount does not feature any sharp edges while featuring the same high quality black anodizing known from all Spuhr products.

    About Spuhr i Dalby AB
    Spuhr i Dalby AB (Spuhr®) was founded in 2007 by Håkan Spuhr to design and manufacture advanced mounting solutions and weapon upgrade kits for elite military, police, and civilian customers. Best known for their Ideal Scope Mount System™(ISMS™,) an innovative and market-changing approach to optics attachment, Spuhr® is a fully owned member of Colt CZ Group SE.

  3. #3

  4. #4
    Industry Member North_Sylva's Avatar
    Join Date
    Apr 2011
    Posts
    7,163
    [SHOT 2024] Spuhr Displays RDF Red Dot Mount
    https://www.thefirearmblog.com/blog/...red-dot-mount/

  5. #5

  6. #6

  7. #7
    CGN Regular Dude in G.P.'s Avatar
    Join Date
    Dec 2005
    Location
    Having Fun on The Firing Line
    Posts
    931
    Depending on price, that could be a very attractive alternative to Unity Mounts.
    Yep, it's like that.....

  8. #8
    CGN Regular
    Join Date
    Dec 2013
    Location
    Brantford
    Posts
    282
    that is very nice whats the height?
    Being a gun owner in this country comes with a life sentence of hard political labour

  9. #9

  10. #10
    CGN Regular
    Join Date
    Apr 2015
    Location
    Vancouver Island
    Posts
    483
    Step-ladder height over bore is so hot right now.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •