Spring 2020 Optics Promotion - $200 Cut and Coated

[hfx123]

You can ship as little or as much of the gun as you want. If you ship the frame though you will generally require an ATT to get it to the post office, so we recommend you call the CFO before departing the pistol to us. Most clients send them Canada Post, you'd want tracking and a signature required.

The color options are unlimited so long as its a single/solid color. This is what is quoted for price in the promotion. If you want something more elaborate we have to ascend the rate for the cerakote.

-Devon

Can you clarify... This is just cerakote for the cut right? Not the entire slide?

[Kamikaze11]

any optic cut for a g17 gen5 allow to keep the iron sights ?

[9mmGunGuy]

Can you clarify... This is just cerakote for the cut right? Not the entire slide?

I believe they're coating the entire slide.

[hfx123]

I believe they're coating the entire slide.

Thanks that's what I was curious about. Don't want to lose the pvd finish on the 19x

[Loosethoughts]

The bolt width on the footprint is too wide for the taper in the slides, so we won't be offering that unfortunately.

Makes sense thanks for the reply.

[Black Box Customs]

Pretty awesome promotion! Can you do a Delta Point Pro on a Tanfoglio Stock 2?

We should be able to - we've cut them on Shadow 1/2 pistols and the internals/voids are very comparable so it should be possible yes.

[Black Box Customs]

Thanks I'll get signed up here soon and drop it down. Sealing plate? Is this referring to cover plate? If so yes that is what I want if I don't mount optic right away. You have 508t in stock as well?

The sealing plate and cover plate are two different items. The cover plate would be used to 'fill in' the cut in the event you're not running an optic. The sealing plate is a piece of sheet metal which is designed to seal/protect the electronics of an RMR as they have the exposed battery compartment and electronics on the bottom of the sight. It provides uniform pressure against the o-ring to seal out any moisture and debris.

[Black Box Customs]

Can you clarify... This is just cerakote for the cut right? Not the entire slide?

It's the entire slide - it's very hard to match Cerakote to one specific piece of a slide and also semi-unprofessional to do so as it may be bonded better/worse than the rest of the finish, so the entire slide is stripped and re-coated.

[Black Box Customs]

any optic cut for a g17 gen5 allow to keep the iron sights ?

Yes, if you have a non-MOS G17 Gen5, we can cut it for the following footprints and retain the factory rear dovetail: RMR/Holosun, Shield RMS, Shield RMS-c

[Paulaz01]

How much for the cz sp01 ? And for sig p320