Dominion Powders Now Available

[Johnyy]

K, Thnx man. Figured as so. I am still guna weigh them. haha Cheerz !

[todbartell]

Here's a D4350ssc / IMR 4350 / H4350 / RL19 / H4831sc comparison with the same charge weight

260 Remington, 22.4" Tikka T3x
140gr Speer Hotcor
F-C brass / Fed 210M primer
2.865" OAL (.030" jump)
43.0grs powder

H4350 - 2719 fps
IMR 4350 - 2648 fps
RL19 - 2598 fps
D4350ssc - 2537 fps
H4831sc - 2495 fps

Average velocity from 4 rounds of each load, measured with Labradar

[Buckmastr]

Nice, I use RL 19 data in quick load to build loads using d4350sc.

Is there only one lot of d4350sc around? Mine shows lot 25 purchased June 2020.

[Foxracing cr]

What would you guys recommend for the tikka 7mm08? I'm currently using h4350 at 48.3 grains and a 140gr, 2850ish velocity. D4350ssc seems quite a bit slower, would d4895 or d4064 be better ?

[Buckmastr]

D4064 shot very well in my 7/08

[Foxracing cr]

D4064 shot very well in my 7/08

Thanks, what load were you using? Velocity?

[Buckmastr]

Thanks, what load were you using? Velocity?

https://www.canadiangunnutz.com/foru...1#post17183701

See post 157, 120 gr bullets

[Foxracing cr]

https://www.canadiangunnutz.com/foru...1#post17183701

See post 157, 120 gr bullets

Thank you! Looks to be a good powder for the 708 as well

[coleman1495]

What would you guys recommend for the tikka 7mm08? I'm currently using h4350 at 48.3 grains and a 140gr, 2850ish velocity. D4350ssc seems quite a bit slower, would d4895 or d4064 be better ?

I’ve had good success with ~43gn D4895 with a 139gn 7/08. Yields just over 2800fps.

[Foxracing cr]

I’ve had good success with ~43gn D4895 with a 139gn 7/08. Yields just over 2800fps.

That was another powder I was curious about, the 4895. How's your accuracy with it ? Have you tried the 4064 before ?