Dominion Powders Now Available

[Buckmastr]

Yes in my opinion.

[jordanlillico]

I will be trying the D4350ssc in a 338lapua with 230eldx
In the near future let me know if any interest I testing

[jordanlillico]

Also D4350SSC with 145MB @ 44.2 gr at 400 yard was 2.5 inch 4 shots with the 5th opening it up to 5.1inch
SD of 6.96
LMR primer
.025 jump

[jordanlillico]

.....

[TheNatural21]

My D4895 arrived today! I have been using H4895 in a couple 308's for a long time but I haven't been able to find it lately and I'm almost out. Can anyone tell me how the current batch of D4895 compares to IMR4895 or something else in my loading manual? The IMR data, -10% and work up instructions aren't hard to follow, but if I could get a closer starting point it would help speed things up.

[Johnyy]

Obvi. I'm a novice. Is there any one' powder, that you can use to load anything from 9mm to .308?

[bigplinker]

Obvi. I'm a novice. Is there any one' powder, that you can use to load anything from 9mm to .308?

A fast powder like d700 would work in both, but badly; you wouldn't be getting the potential you can out of either.
But if you were just looking for subsonic I'm sure you could work up a load in either

[Johnyy]

K thnx. I figured so, but thought maybe something {new} has come along that covers both ends.

[mbogo3]

ok so if my brains working properly here the D4895 is like imr4895 and seems like something id try in my 45-70. what would y'all recommend in the 30-06 something like 4064?

I use 51gr of IMR 4895 in my son's T3-30-06 with Barnes TTSX 150gr bullets @2950fps and .678" 3 shot groups.Does 40" of moose and deer bangflop mostly.

[jordanlillico]

D4350SSC with 230eldx in a 338lapua
@84.3gr was 2850fps and 100was .181 inch 3 shots

It is again trending with RL19 data