Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 39

Thread: first time reloader

  1. #21
    CGN Ultra frequent flyer
    Join Date
    Jan 2017
    Posts
    4,710
    Quote Originally Posted by Boomer686 View Post
    Dillon 550 and never look back again!
    Quote Originally Posted by Meroh View Post
    Pistol only.
    Must use Dillon dies, and the change over kits are not cheap.

  2. #22
    BANNED
    Join Date
    Jul 2012
    Location
    West Quebec
    Posts
    97,973
    Quote Originally Posted by aakoksal View Post
    I suggest you start with a good single stage press, learn the process step by step. Within a couple of years, you'll figure out yourself which type of progressive would work best for you. Your single stage press will be your goto press for precision rifle rounds so it is still going to be a good investment...

    From that perspective, I recommend RCBS Rockchucker as a great press to start with. Very precise, built to last. Redding Ultramag is another great press that I have been using for 13+ years and very happy with it as well but it is on the expensive side...
    Great advice insert a Forster press in my case

  3. #23
    Super GunNutz 65gks's Avatar
    Join Date
    Jan 2019
    Location
    Kitchener, On.
    Posts
    109
    Single stage press- RCBS Rock Chucker Supreme , Hornady, Redding Big Boss or Big Boss 2, buy a kit if you can

  4. #24
    Northern Mod Boomer686's Avatar
    Join Date
    Apr 2004
    Location
    The Big Land
    Posts
    7,214
    Quote Originally Posted by Meroh View Post
    Pistol only... must use dillon dies.
    Umm.. no!!!! Stop spreading misinformation. You have obviously never used / seen a dillon.

    I had two single stage presses when I started out: never went a year before upgrading to a progressive & that was almost 30 years ago now....

    Dillon machines use the typical 7/8 thread which means dies from any manufacturer will work in their machine. Many precision shooters have proven time and again (including David Tubb 20+ time world / international etc etc champion, developer of the OCW etc etc ) that precision rifle rounds are done on a dillon progressive. The 550 can do from the smallest pistol up to 338LM and do it very accurately (all my rifle reloads shoot sub moa out to 1580M; a testament to the capabilities of a dillon progressive). FYI my Dillon is over 28 yo and still rocking out.

    The options / convenience/ speed & product support a dillon machine has is unparalleled. Pretty much everyone who shoots any amount of ammo / has multiple calibres to reload always ends up with a progressive anyway; buy once cry once. If you only shoot a few hundred rounds a season, reload for only one or two calibres and are hell bent on a single stage then go for the rockchucker.

    If I had to do it all again I would just buy the Dillon from the start and be done with it!
    Last edited by Boomer686; 04-22-2020 at 09:30 AM.
    Enjoying your freedom? Thank A Soldier !!!

    You say nobody needs an AR15? Well nobody needs a whiny little b*tch either yet here you are!

  5. #25
    CGN frequent flyer
    Join Date
    Mar 2013
    Location
    SW Ontario
    Posts
    1,878
    Quote Originally Posted by mluckhardt View Post
    I think a Lee pro 1000
    Is that a good start?
    If you're choosing Lee due to budget realities (welcome to the club ) I would recommend the loadmaster if you can scrape up a little extra. The extra die stations will come in handy. They are quite readily available on the used market, and parts and accessories are not hard to get. Also get the drum powder dispenser, it's case activated and so much more reliable than that flimsy chain system you get with the press.

    If money is no object, then yeah, go with the Dillon. I started with the Lee hand press. Production was slow lol but it was a cheap way to get in and learn the hows and whys.

  6. #26
    CGN Regular zman75's Avatar
    Join Date
    Aug 2015
    Location
    Ontario
    Posts
    136
    Quote Originally Posted by dirtybarry View Post
    The Lee turret press that I bought from Henry has served me well. I can go as fast or as slow as needed. Slide the rotating rod out and it becomes a single stage press for rifle cartridges. get some spare turrets and changing calibres takes around 15 seconds. The Dillon is great for producing high volumes of pistol rounds but switching calibres takes time and money.
    This. I reload for 3 different calibers. Change the shell holder, change the turret. Done. Confirm COAL, start loading.

  7. #27
    CGN Regular
    Join Date
    Aug 2015
    Location
    Caledon, Ontario
    Posts
    355
    I started with a used package deal that included a single stage press and a Dillon Square Deal B.
    I set up the single stage first and started loading 9mm on that for many of the reasons mentioned above.
    My thoughts were, man this is slow and somewhat annoying. And I tend to like detailed, fine work.
    Then I set up the Dillon SDB and thought, wow that's better.
    After that, I picked up a used Dillon 550B for .223.
    I've ended up competing as well as shooting for practice and fun and can fine tune both calibers however I like.
    The single stage never gets used. I only hold on to it in case I start to shoot a lot more .308 and end up competing in long range rifle shoots.
    If I had to buy one all round press, it would probably be a Dillon 550 budget wise, or possibly 650.
    Dillon's warranty service is fantastic. Just call them and tell them what parts you need and all you pay is shipping.

  8. #28
    CGN Regular slim123's Avatar
    Join Date
    May 2009
    Location
    Gateway to the Rockies
    Posts
    434
    I have been reloading for years with my lee pro 1000 press, i first got into lee because of the lower price point than the others....i finally started to wear out parts of the press after many years of use, and was time for an overhaul
    Instead of overhauling my pro 1000....I decided to try lees new auto breech lock pro press....and the price was fantastic...200 bucks new!!

    I really like it a lot, it doesnt need to be fiddled with as much as the pro 1000, and its sorta can be described as a hybrid press....has a good solid plate locking pin between stages...and is very easy to swap out plates

    Just ran off 1000 44mag thru it for its maiden voyage.....and i am very happy with it....if you are on a tight budget (who isnt these days) thats the one i would recommend
    "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."

  9. #29
    Uber Super GunNutz aakoksal's Avatar
    Join Date
    Jan 2008
    Location
    Alberta
    Posts
    1,618
    Not very fond of Dillon presses, expensive if you want to add other calibres, got to use Dillon dies... Like to have different options... Have been using RCBS progressives for 20+ years, great products, great warranty...

  10. #30
    CGN Ultra frequent flyer
    Join Date
    Jan 2017
    Posts
    4,710
    Quote Originally Posted by slim123 View Post
    I have been reloading for years with my lee pro 1000 press, i first got into lee because of the lower price point than the others....i finally started to wear out parts of the press after many years of use, and was time for an overhaul
    Instead of overhauling my pro 1000....I decided to try lees new auto breech lock pro press....and the price was fantastic...200 bucks new!!

    I really like it a lot, it doesnt need to be fiddled with as much as the pro 1000, and its sorta can be described as a hybrid press....has a good solid plate locking pin between stages...and is very easy to swap out plates

    Just ran off 1000 44mag thru it for its maiden voyage.....and i am very happy with it....if you are on a tight budget (who isnt these days) thats the one i would recommend
    Finally, someone who has used one! I am considering one of these for my third progressive. What are other features on this press that you would consider improvements over the pro-1000?

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •