AR-15 parts that will work with Troy PAR-15

Shazam said:
You mean doesn’t fit?
Click to expand...

no it fits, but once you fire.
rack the action, then try to put into battery the bolt stops half way. you have to hold the trigger down to put into battery. i think it has to with 2 stage trigger, as factory is good, so is my other 1 stage trigger.
i tried it with sd-c, and sd-e.
 
If you look back in the thread you'll see that giessele don't work. I tried it as well. The problem is that they use a smaller hammer face. It's actually the bottom part of the hammer that disengages the bolt hold open/bolt lock. The smaller hammer does not engage the necessary tab to allow you to pump the rifle.
 
KePet said:
If you look back in the thread you'll see that giessele don't work. I tried it as well. The problem is that they use a smaller hammer face. It's actually the bottom part of the hammer that disengages the bolt hold open/bolt lock. The smaller hammer does not engage the necessary tab to allow you to pump the rifle.
Click to expand...

a real bummer
 
Not sure where you received info that the lab can convert to full auto? There is not an Engineer or Gunsmith in that building.
And any block of steel can be made into anything.

Above49TH said:
If 75% of it is not covered in wood.
If it has a removable mag like a military style rifle.
And a pistol grip.

Yes The lab can convert it to full auto
Click to expand...
 
You must log in or register to reply here.
Back
Top Bottom