The MRA Renegade Receiver Set is a novel, spring assisted, straight pull, magazine fed firearm design.# It is composed of a proprietary Receiver, Bottom Metal, and proprietary bolt carrier with integrated, swap-able left or right hand charging handle.# This receiver kit is compatible with a wide variety of commonly available firearm parts and accessories.# In this way, the user can build a rifle to meet their specific utility and budget.
This receiver set is designed and intended to not be capable of discharging ammunition in a semi-automatic fashion.# The design is novel and is not derived from any restricted or prohibited firearm.# Due to the action type and novel design, this receiver set meets the legal standard of a non-restricted firearm as per the Canadian Firearms Act and related Regulations.# The minimum overall length when assembled into a working firearm must be over 26" to meet the standard of non-restricted.
Features:
Spring-assisted, manually-operated, straight-pull bolt action
Side-charging handle can be mounted to Left or Right side (ejects to the Right always
Can be readily assembled to shoot 223 Rem, 5.56x45, .300 BLK, 6.5 Grendel, .224 Valkyrie, 7.62x39, and many other cartridges
Integrated QD port at the rear
Extra-flared magwell
Designed and manufactured entirely in Canada
Specifications:
Receiver and Bottom Metal Material:# High quality, domestically sourced 6061-T6 alloy
Receiver and Bottom Metal Finish:# Hard Black Anodizing
Bolt Carrier Material:# HTSR 4140 steel
Bolt Carrier Finish:# QPQ Black Nitride
Caliber:# Multi
Included Components:
(1) MRA Renegade Receiver
(1) MRA Renegade Bottom Metal
(1) MRA Renegade Bolt Carrier (requires bolt, firing pin, camp in, and retaining pin)
(1) MRA Renegade Cylinder Charging Handle
(1) MRA Renegade End Plate
(1) MRA Renegade Barrel Gas Journal Seal .750" diameter (allows the use of various aftermarket barrels with a gas port)
Required Components:
Barrel, bolt, hanguard, buttstock, lower parts kit, bolt, muzzle device
Compatible with:
Most AR-15 barrels, buttstocks, handguards, pistol grips, magazines, etc.
Not compatible with:
#AR-15 bolt carriers, AR-15 upper receivers, AR-15 lower receivers, AR-15 charging handles
Made in Canada
Attachment 431024
Tags:
None
-
MRA Renegade Rifles, Parts, and Kits now available
Last edited by Maple Ridge Armourer; 11-19-2020 at 11:00 PM.
-
Pictures of a working prototype?
"Arguing with idiots is like playing chess with a pigeon..... No matter how good you are, the bird is going to s#!t on the board and strut around like it won anyway." -
Very cool. A short barrel 308 would be a fun little hunting rifle or target rifle. Spring assist and ambi charging handle Is a nice touch
-
Is there a 308 version of this planned or coming? Or does the carrier accept 308 bolts?
Romans 13:4 -
Does the charging handle reciprocate? Looks like that thing would hurt when/if it smacked you.
-
It's not a semi auto finger assaulting style rifle...
Originally Posted by Cridler
Last edited by jiffx2781; 06-06-2020 at 02:40 PM.
"Arguing with idiots is like playing chess with a pigeon..... No matter how good you are, the bird is going to s#!t on the board and strut around like it won anyway." -
Order in
-
Is there no mechanism to lock the bolt back?
-
Stick in a chamber safe flag? A lot of disciplines require you do that anyway. Originally Posted by thegrandpoohbah
Though it does occur to me that a normal AR assumes locked-back bolt on reload and doesn't like to accept a full mag under a closed bolt. That's something that hopefully MRA has solved if their bolt wants to stay forward.Last edited by old303; 06-06-2020 at 04:30 PM. Reason: added thought
-
this..... I'm holding out for a large frame model Originally Posted by Bare
