Page 31 of 38 FirstFirst ... 112123242526272829303132333435363738 LastLast
Results 301 to 310 of 371

Thread: Sterling Arms TR

  1. #301
    CGN Regular
    Join Date
    Nov 2019
    Location
    Rural Alberta
    Posts
    649
    Quote Originally Posted by metamatt View Post
    Lol, yeah that is probably one of the safer ranges

    I am only shooting on private property and crown land... If asked I am not doing their work for them, in terms of associating it with AR15s or any other prohib firearm.. As far as I know its called the Target Sporting Rifle by Sterling Arms as marked on the lower receiver and was not one of the ones named in the OIC, that's it that's all
    agreed, but having the documents handy in case it goes further is not a bad idea, especially since most LEO and CO's won't be able to tell the difference between an SAI TR and an AR.

  2. #302
    Member Uther419's Avatar
    Join Date
    Oct 2015
    Location
    Ontario
    Posts
    55
    still stripping parts to build mine, any word on additional uppers?

    Last i heard it was a maybe

    Cheers.

  3. #303
    The Shooting Edge - CGN Sponsor TSE JR's Avatar
    Join Date
    Mar 2004
    Location
    Calgary
    Posts
    1,257
    Okay.... The last batch with the "specific serial #s are leaving today! Special eye roll for #69 and #420, but a good laugh over 666 and the very auspicious 888.

    We now can deal with the waiting and wish lists due to cancellations.

    Yes there are extra uppers available as well. Price on those are $400 (plus GST)

    Unfortunately, Logan is away this week and I cannot understand his "post it note" lists, so everyone who has written will have to wait till next week....

    I'll follow up in this thread next week.

    You can also email Logan and Tara: websales@theshootingedge.com

    Also: since they haven't left our shop yet, if you want them assembled, we still do this.

    JR
    Last edited by TSE JR; 08-06-2020 at 03:36 PM.
    \"J.R."\
    CEO

    The Shooting Edge, Target Sports Canada, William Evans

  4. #304
    CGN frequent flyer THE_SASQUATCH's Avatar
    Join Date
    Sep 2011
    Location
    The Forest
    Posts
    1,449
    A friend of mine believes either his LPK is out of spec, or the well/cut for the magazine catch may be out of spec

    He went to build today, and the catch won’t even seat 50%. It gets completely hung up


    Thoughts?

    8B370BA1-F5FE-496E-B2E1-06204516785E

    D938E930-C527-44BC-8705-4517E36BAFAF

    428132A7-D9E1-4BA1-B2FA-AFA552925DF3


    Using a KE Arms (Arizona, US made) GI Parts kit.

    I say cest la vie and take a file to the catch


    -

  5. #305
    CGN Regular
    Join Date
    Jun 2015
    Location
    Ontario
    Posts
    231
    Quote Originally Posted by THE_SASQUATCH View Post


    Using a KE Arms (Arizona, US made) GI Parts kit.

    I say cest la vie and take a file to the catch


    -
    It's hanging up on the side of the receiver? Like it's not that the mag release it has to be threaded in more?

    My buddy's measures 0.24" and the hole in receiver is 0.25".. or 6.1mm and 6.4mm respectively

  6. #306
    CGN Ultra frequent flyer DOOK's Avatar
    Join Date
    Oct 2007
    Location
    Surrey B.C.
    Posts
    4,538
    I'd just file the catch.
    Last edited by DOOK; 08-17-2020 at 06:08 AM.

  7. #307
    CGN frequent flyer Justins1877's Avatar
    Join Date
    Feb 2009
    Location
    Surrey,BC
    Posts
    1,913
    Quote Originally Posted by TSE JR View Post
    Okay.... The last batch with the "specific serial #s are leaving today! Special eye roll for #69 and #420, but a good laugh over 666 and the very auspicious 888.

    We now can deal with the waiting and wish lists due to cancellations.

    Yes there are extra uppers available as well. Price on those are $400 (plus GST)

    Unfortunately, Logan is away this week and I cannot understand his "post it note" lists, so everyone who has written will have to wait till next week....

    I'll follow up in this thread next week.

    You can also email Logan and Tara: websales@theshootingedge.com

    Also: since they haven't left our shop yet, if you want them assembled, we still do this.

    JR
    Email sent about the possibility of snagging a cancelled order.
    Member CSSA
    Originally Posted by ian_in_vic
    Justins, I bet that Tavor works great to get you across KGH and 96 on a Friday night.
    Quote Originally Posted by ki11ercane View Post
    You only lose what rights you freely give up.

  8. #308
    CGN Regular Lumberjack_Kerouac's Avatar
    Join Date
    Dec 2014
    Location
    El Norte
    Posts
    221
    Quote Originally Posted by THE_SASQUATCH View Post
    A friend of mine believes either his LPK is out of spec, or the well/cut for the magazine catch may be out of spec

    He went to build today, and the catch won’t even seat 50%. It gets completely hung up


    Thoughts?

    -
    Is it fully threaded in? Push on the mag release button then rotate the catch clockwise a few times and see if that doesn't fix it.
    “I spent most of my dough on guns, gals, and gas, and the rest I wasted.”
    -me, with apologies to Elmore Leonard

  9. #309
    CGN frequent flyer THE_SASQUATCH's Avatar
    Join Date
    Sep 2011
    Location
    The Forest
    Posts
    1,449
    Yeah, it won’t even enter the cut-out enough to start threading the button on the other side. Looks like about 1mm too wide to fit in.

    Not an issue by any means - just wondered if anyone else experienced this

  10. #310
    CGN frequent flyer koesdibyo's Avatar
    Join Date
    Jun 2012
    Location
    Orillia, Ontario
    Posts
    1,729
    Quote Originally Posted by THE_SASQUATCH View Post
    A friend of mine believes either his LPK is out of spec, or the well/cut for the magazine catch may be out of spec

    He went to build today, and the catch won’t even seat 50%. It gets completely hung up


    Thoughts?

    Using a KE Arms (Arizona, US made) GI Parts kit.

    I say cest la vie and take a file to the catch


    -
    My first thought is to test it against another lower if possible (such as an AR15).
    I have run into issues with a magazine catch unable to fit one lower, but fit another. While this might lead one to think the lower is out of spec, I cross tested it with another bolt catch, and it fit both lowers.

    Sometimes the tolerances can be JUST at (im)perfect alignment that they don’t work.
    The choice in this case is to file an expensive part, or file a cheap $10 part... I know what option I’d be choosing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •